Functions - Bernina 750 QE User Manual

Functions - Display
functions - Display
overview Sewing functions
1
2
General functions
Information
⦁
touch icon
►
another Display is opened
Back
⦁
touch icon
►
goes back to the previous Display
►
all changes are saved
confirm selection
⦁
touch icon
►
activates or confirms alteration/selection
Leaving the active Display
⦁ touch icon
►
the Display is closed
►
goes back to the previous Display
needle stop up/down
⦁
touch icon
►
the arrow on the Display points down
►
the sewing computer stops with needle down
⦁
touch the icon again
►
the arrow on the Display points up
►
the sewing computer stops with needle up
pattern begin
►
the function appears when the sewing computer is
stopped while sewing a single stitch or a stitch
combination
⦁ touch icon
►
the needle moves to the beginning of a stitch
pattern or program
34
3 4 5 6
7 8 9 10
11 12 13 14
15 16 17 18
034247.71.04_2014-02_Manual_B750_EN
⦁ touch «i»-icon
►
«Function»-display appears

functions

1 Needle stop up/down
2 Pattern begin
3 Securing
4 Pattern repeat
5 To alter pattern length/stitch density
6 Upper thread tension
7 Needle position
8 Mirror Image (Left/Right)
9 Personal memory permanent
10 Security program
11 Long stitch
12 Mirror image (Up/Down)
13 Clear saved setting to default
14 Presser foot indicator
15 Permanent reverse sewing
16 Balance
17 Stitch Counter
18 Presser foot pressure
Securing
⦁
touch icon before sewing
►
the single stitch is secured with four stitches at the
beginning
⦁
touch icon while sewing a single pattern
►
the single stitch is secured at the end
►
the sewing computer stops
⦁
to program the securing function within a stitch
combination
⦁
any single stitch of the combination can be secured
at the begin or at the end
pattern repeat
⦁ touch icon 1x
►
number 1 appears: the sewing computer stops at
the end of a single stitch or a stitch combination
⦁ touch icon 2-9x
►
numbers 2-9 appear: the sewing computer stops
after the selected repeats of single stitches or a
stitch combination
altering pattern length
⦁
move the round knob in the Display using the finger
►
pattern length (Standard = 100%) is infinitely
variable
⦁
extend or shorten in 1%-steps using the arrow
icons or
⦁
touch «Pattern length»-icon
►
the pattern length is extended in 100%-steps
Maximum length is 1000%, shortest length is 10%.
Some stitch patterns are limited and cannot be
extended to 1000%.
upper thread tension
⦁ change upper thread tension
►
the respective value is visible in the icon