Thread Needle; Changing The Presser Foot - Bernina 750 QE User Manual

Sewing preparation

thread needle

1
2
1

changing the presser foot

1
1
24
⦁
⦁
⦁
⦁
3
⦁
⦁
⦁
⦁
4
►
⦁
⦁
Threads release automatically as soon as the first stitch is sewn.
removing the presser foot
⦁
⦁
⦁
⦁
attaching the presser foot
⦁
⦁
034247.71.04_2014-02_Manual_B750_EN
Position the needle by pressing the foot control once (1 stitch).
raise the needle
lower the presser foot
turn power switch to «0» (off)
hold thread to the left and back
press lever 1 down and hold it
guide thread around the hook 2 to the right in front of the needle
put the thread from the front into the guide 3 until it catches in the wire hook
release lever 1 and thread
needle is threaded
pull the thread to the back and
put the thread under the foot and pull it from back to front over the thread
cutter on left side of the head frame 4, cut
raise the needle and presser foot
turn power switch to «0» (off)
raise the clamping lever 1
remove the presser foot
guide the presser foot upwards over the cone
press the clamping lever 1 down