Monitoring; Altering The Winding Speed - Bernina 750 QE User Manual

Setup Program

monitoring

altering the winding speed

update
2
50
⦁
The following monitoring functions can be activated or deactivated:
1 Upper thread indicator
2 Lower thread indicator
1
upper-/Lower thread indicator
►
⦁
2 ►
The sound type for the monitoring functions is set in the audio settings for
functions.
⦁
⦁
⦁
►
⦁
⦁
It is recommended to save the data and the settings of the sewing computer
before the update is carried out.
⦁
⦁
⦁
1
It is then checked if:
3
►
After the successful update a message appears and sewing-/embroidery
computer is ready for use.
034247.71.04_2014-02_Manual_B750_EN
touch «Monitoring»-icon
open eye = function active
touch «Open eye»-icon
closed eye = function inactive
touch «Winding speed»-icon
move round knob in the Display to the left/right using the finger or
turn the stitch width knob
the winding speed is changed
Do not remove the BernIna uSB stick until there is a message
which indicates the end of the update.
insert BERNINA USB stick with the new software version
touch «Update»-icon
touch icon 1
the data of the sewing computer is saved on the USB Stick
touch «Update»-icon 2 to start the procedure
►
a BERNINA USB stick is inserted
►
there is enough free space available
►
the correct software version is on the stick
the data and settings are accepted