Connecting The Headset - Siemens E49H User Manual

First steps
Display in idle status
Once the phone is registered and the time set, the idle display is shown as in
this example.
Displays
¼
Eco Mode + activated (
½
Eco Mode activated (
Charge status of the batteries:
= e V U (flat to full)
= flashes: batteries almost flat
Internal name of the handset
INT 1
If Eco Mode + (
the strength of the radio contact between the base station and the handset:
Good to poor: Ð i Ñ Ò
u
No reception: | flashes
u
Your phone is now ready for use!

Connecting the headset

A compatibility list of tested headsets can be found on the Internet at:
www.plantronics.com/productfinder.
12
¢
page 25)
¢
page 25)
¢
page 25) is not activated, the top left of the display shows
After removing the rubber cover you can
connect a headset with a 2.5 mm jack con-
nector to the bottom of your phone. Head-
sets of this type include HAMA headsets
and Plantronics M40, MX100 and MX150.
Reinsert the rubber cover after you have
finished using the headset.
¼ ½ V
INT 1
01.10.09 07:15
INT SMS