Battery Charging; Battery Charge Status; Connecting The Headset; Calls Sms - Siemens Gigaset C610H User Giude

First steps
Display in idle status
Once the phone is registered and the time set, the idle display is shown as in this
example.
Displays
u
Reception signal between the base and handset:
– Poor to good: Ð i Ñ Ò
– No reception: |
Green: Eco Mode activated (
u

Battery charge status:

– { white: charged over 66%
– { white: charged between 34% and 66%
– y white: charged between 11% and 33%
– y red: charged below 11%
– y flashes red: battery almost empty (less
than 10 minutes talktime)
– xy xy x{ x{ white: battery charging
If you have chosen a colour scheme with a white background, the white sym-
bols are displayed in black.
u
INT 1
Internal name of the handset
If Eco Mode+ (
Your phone is now ready for use!

Connecting the headset

16
Please note
¢
page 36) is activated, the ¼ icon is displayed in the top left.
You can connect a headset with a 2.5 mm jack connector.
See the relevant product page at www.gigaset.com for
information on recommended headsets.
¢
page 36)
i V
07:15
INT 1 14 Oct
Calls SMS