Siemens E49H User Manual page 9

First steps
¤
Insert the rubber cover supplied for
the headset socket to guarantee
the unit is still splashproof.
If you need to re-open the battery cover, for instance to replace the batteries,
proceed as follows:
¤
Turn the lock ring or belt clip
anticlockwise to the end stop
(approx. 20°) and remove.
To remove the lock ring, place
your thumb and index finger on
the two notches on the lock
ring.
¤
Insert a suitable tool (e.g. a
small coin) into the cavity at the
top of the battery cover and
twist until the cover opens.
Placing the handset in the charging cradle
¤
Insert the mains adapter of the charging cradle into the mains socket.
¤
Place the handset in the charging cradle with its display facing forward.
To charge the battery, leave the handset in the charging cradle.
Please note
Only place the handset in the charging cradle that is intended for it.
8