Siemens E49H User Manual page 10

Registering the handset
You must initiate handset registration on the handset and on the base sta-
tion.
On the handset
Please register
ì
Alarm Clock
í
Add. Features
Ð
Settings
Ý
¤
Press the bottom of the control key until
¤
Press the display key
¤
Press the bottom of the control key until
bar.
¤
Press the display key
¤
Enter the system PIN of the base station (the default is 0000) and press
Regstr.Procedure
Base 1
On the base station
¤
Within 60 seconds, press and hold the registration/paging key on the base
station (approx. 3 seconds).
Following successful registration, the internal number of the handset is dis-
played, e.g. INT 1.
If registration was unsuccessful, repeat the process.
Please register
¤
OK
¤
to open the submenu.
§OK§
to open the submenu.
§OK§
A message appears in the display to
indicate that the registration procedure
has started.
flashes on the display.
Press on the right side of the control
key to display the main menu.
¤
Press the bottom of
the control key until
Ð
Settings
lighted by the bar.
Press the display key
submenu.
is highlighted by the bar.
Handset
Register H/Set is highlighted by the
First steps
is high-
to open the
§OK§
.
§OK§
9