Canon PIXMA MP500 User Manual page 48

Procedure:
(1) Display the Special copy screen.
See "Special Copy" on page 41 .
(2) Use [.... ] or [..... ] to select <Image repeat>, then press [OK].
(3) Use [A] or [-.] to select <Auto layout> or <Manual layout>.
If you selected <Auto layout> and pressed [OK], go to step (7).
If you selected <Manual layout> and pressed [OK], go to step (4).
(4) Use
LAo]
or [.... ] to set the vertical repeats.
(5) Press [..... ] to move the cursor to the right.
(6) Use
LA.]
or ['f'] to set the horizontal repeats, then press [OK].
(7) Specify the necessary items.
See "To Change Print Settings" on page 35.
(8) Press [Color] for color copying, or [Black] for black & white copying.
• The area read from the documents depends on the enlargement!
A
Important
reduction ratio.
• The size of the documents to copy should be no larger than one
division of the paper. For example, if you copy four documents at the
same size, their sizes must be one-fourth of the page size or smaller.
W
Note
• <Credit card> cannot be selected for the page size.
• <Fit-to-page> cannot be selected for <Magnification> .
• Copying with Fade Restoration (Fade-restored copy)
This function helps to correct the color when copying documents that have faded over time.
1
Prepare for copying.
See "Prepare for copying." on page 39.
2
Select the copy men u.
(1) Press [Menu].
(2) Use [ ] or [ ] to select <Special copy>, then press [OK].
(3) Use [ ] or [ ] to select <Fade-restored copy>, then press [OK].
3
Start copying.
(1) Follow the on-screen instructions to load the document on the Platen Glass, then press
[OK].
(2) Specify the necessary items.
See "To Change Print Settings" on page 35.
(3) Press [Color] to start copying.
46 Copying
Chapter 2