Canon PIXMA MP500 User Manual page 19

• Operation Panel Name and Functions
(1) (2) (3) (4) (5) (6)
(7) (8) (9)
PIXMAMPSOO
(10) (11) (12) (13) (14) (15) (16) (17) (18) (19) (20)
(1) [ON/OFF]
Turns the machine ON and OFF. Before turning ON the machine, make sure the
Document Cover is closed.
(2) [COPY]
Switches the machine to Copy mode. Flashes when the machine is turned on.
(3) [SCAN]
Switches the machine to Scan mode. This button is used when the machine is connected
to a computer. (Refer to the Scan Guide.)
(4) [MEMORY CARD]
Switches the machine to Memory Card mode.
(5) Alarm Lamp
Flashes orange, when an error occurs, or when paper or ink has run out.
(6) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operation status.
(7) [Menu]
Used to display menus.
(8) [Settings]
Use to configure the page size, media type, and image correction settings.
(9) [Stop/Reset]
Cancels operations. If this button is pressed during printing, the machine aborts printing.
(10) Auto Sheet Feeder Lamp
Lit when the Auto Sheet Feeder is selected.
(11) Cassette Lamp
Lit when the Cassette is selected.
(12) [Feed Switch]
Selects the paper source. Press this toggle switch to change the paper source between
the Auto Sheet Feeder and Cassette.
(13) [Search]
Looks up target photos in the memory card using the shooting date as the search key.
See "Searching for Photos with the Shooting Date (Search)" on page 54.
(14) [Photo Index Sheet]
Switches to Photo Index Sheet mode. See "Printing by Using the Photo Index Sheet" on
page 60.
(15) [Back]
Allows you to return to the previous screen.
Chapter 1 Before Printing
17