Canon PIXMA MP500 User Manual page 134

• Error No.: 1700 is Displayed
Cause Action
The waste ink absorber is almost
full.
Ink used for cleaning is absorbed in a waste ink absorber placed in the
machine.
Press the [OK] to cancel the error so that you can continue printing. Once
the waste ink absorber becomes completely full, printing cannot be done
until the waste ink absorber is replaced.
Canon recommends to contact the Canon Customer Care Center as soon
as possible.
• Error No.: 1851 is Displayed
• Error No.: 1856 is Displayed
Cause Action
During regular printing, Inner Cover
is opened.
Close Inner Cover, press [OK] on the machine, then try printing again.
One page of the print data being sent at the time of the error will be
erased, so print that page again.
• Error No.: 2001 is Displayed
Cause Action
A specified period of time has
elapsed without receiving a
response from the digital camera.1
The digital camera or digital video
camcorder connected is not
compatible with this machine.
Disconnect the camera cable and reconnect it.
Depending on the model or brand of your device, you may have to select a
print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the machine. Unplug the connecting cable
and clear the error. Perform necessary operations for connection referring
to the instruction manual supplied with your device, and then connect the
cable again.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
machine. Use a digital camera or digital video camcorder compatible with
this machine.
132 Troubleshooting Chapter 11