Canon PIXMA MP500 User Manual page 42

• Reducing or Enlarging a Copy
You can reduce or enlarge copies.
1
Prepare for copying.
See "Prepare for copying." on page 39.
2
Select the reduction/enlargement method.
The example below assumes that you will select <Zoom (25-4000/0».
(1) Press [Settings].
(2) Use [..... ] or [-.. ] to select Tab 1.
(3) Use [A] or [~] to select <Magnification>, and use [-4] or [-..] to select <Zoom (25-
4000/0».
Specify the custom copy ratio for reducing or enlarging copies.
(3)
W
Note
Besides <Zoom (25-400
%
», you can also choose from the following reduction/
enlargement methods.
Same magnification: Copies in the same size as an original.
Preset ratio: Preset ratios are convenient when changing between standard page
sizes, for example, when reducing A4 to A5, or enlarging B5 to A4.
Fit-to-page: You can automatically reduce or enlarge the document to fit the size of
the paper which are loaded in the Auto Sheet Feeder or Cassette.
(4) Press [y] to move the cursor down, and use [-4] or [-..] to select the setting value.
Holding down [-4] or [-.. ] steps through the values faster.
When you choose <Fit-to-page>, the document size may not be detected
correctly depending on the document. In that case, choose <Preset ratio>
or <Zoom (25-400
%
».
3
Finalize your selection.
(1) Press [Settings].
Return to the Copy standby screen.
4
Start copying.
See "Start copying." on page 39.
40 Copying
Chapter 2