Turning The Machine On And Off - Canon PIXMA MP500 User Manual

Turning the Machine ON and OFF
Turn on the machine before starting printing.
• Turning on the Machine
Before turning on the machine, confirm that the Print Head and ink tanks are set into place.
W
Note
If preparatory operations above are not yet finished, follow the Easy
Setup Instructions to complete them.
1
Press
[ON/OFF].
[COPY] flashes green for a while, and then turns on .
@ID Note
• If the Alarm Lamp flashes orange and an error message is displayed
on the LCD, see "An Error Message is Displayed on the LCD" on
page 105.
• The LCD goes out if the machine is not operated for 5 minutes. Press
any button to restore the display.
A
Important
• Turning off the Machine
1
To turn off the machine, press [ON/OFF].
The machine is off when the currently selected Mode Lamp (e.g. [COPY]) stops flashing and
all Operation Panel lamps are off.
When removing the power plug after turning off the machine, be sure to
check that all the lamps on the Operation Panel are not lit. If the power
plug is removed from the wall outlet with the lamps on the Operation
Panel lit or blinking, the machine cannot protect its Print Heads and may
be unable to print.
See "Keeping the Best Printing Results" on page 93.
Chapter 1 Before Printing
19