Canon PIXMA MP500 User Manual page 28

W
Note
W
Note
You can also select the paper source with the printer driver. For details,
refer to Printer Driver Guide.
• Align the edges of paper neatly before loading. Loading paper without
aligning the edges may cause paper jams.
• When paper is curled, hold the opposing curled corners and gently
bend them in the opposite direction until the paper becomes
completely flat. See "Paper is curled." on page 115.
2
Prepare to load paper.
(1) Open the Paper Support, then pull out the Paper Support Extension to support the paper.
(2) Press the Open Button to open the Paper Output Tray.
(3) Pull out the Paper Output Tray Extension completely.
After printing, to put back the Paper Output Tray Extension, push it back
while raising it a little.
(4) Press [Feed Switch] so that the Auto Sheet Feeder Lamp (A) lights.
(2)
W
Note
3
Load the paper.
(1) Load the paper into the Auto Sheet Feeder with the print side facing UP.
(2) Align the paper stack against the Cover Guide on the right side of the Paper Support.
A
Important
Ensure that the Cover Guide stands when you load paper in the Auto
Sheet Feeder.
26 Before Printing Chapter 1