Canon PIXMA MP500 User Manual page 46

(2) Use [~] or [ ] to select <4-on-1 copy> and press [OK].
(3) Use [..... ] or [ ] to select the layout, then press [OK].
(4) Follow the on-screen instructions to load the first document to print on the Platen Glass,
then press [OK].
(5) Specify the necessary items.
See "To Change Print Settings" on page 35.
(6) Press [Color] for color copying, or [Black] for black & white copying.
(7) Load the second document to print on the Platen Glass, and press the same button as
you pressed in step 6.
(8) Repeat step 7 until you finish loading the fourth document, then press the same button as
you pressed in step 6. If you have only one, two or three documents to scan, press [OK]
after loading the last document.
Important
If you do not press the same button in step 6 and steps 7 and 8, the
machine does not start copying.
W
Note
• This function cannot be used in conjunction with other copy functions.
• If <Device memory is full.> appears on the LCD when scanning, set
the print quality to <Standard> and try copying again.
• This function can be used only when page size is set to <8.5" x 11"
(215 x 279» or <A4>.
• You cannot specify <Magnification> for this function.
• Creating Stickers (Sticker Copy)
You can easily make stickers from 4" x 6" / 101.6 x 152.4 mm photos or graphics using Canon
sticker paper.
Platen Glass (place document face down)
16 stickers
Procedure:
(1) Display the Special copy screen.
See "Special Copy" on page 41.
(2) Use
[~]
or [ ] to select <Sticker copy>, then press [OK].
(3) Use [..... ] or [ ] to select <Stickers x 16>.
You can only print in the Stickers x 16 layout though other layouts appear on the LCD.
Use the special sheets of stickers.
Stickers x16
(4) Follow the on-screen instructions to load the document on the Platen Glass, then press
[OK].
(5) Specify the necessary items.
See "To Change Print Settings" on page 35.
44 Copying
Chapter 2