Introduction; Packaging Contents; System Requirements - StarTech.com UNIDOCK3U User Manual

Introduction

The UNIDOCK3U USB 3.0 to SATA/IDE Hard Drive Docking Station delivers instant
access to 2.5" and 3.5" IDE or SATA hard drives through top slot-loading drive slots for
both SATA and IDE, instead of having to mount the drives into a computer or external
enclosure/tray. The slot-loading design holds the SATA and IDE drive upright inside the
dock to keep them off the desk for convenience and a clutter free setup. Connected
to the host computer through a single USB 3.0 connection, both an IDE hard drive
and a SATA hard drive (SATA, SATA II, SATA III) can be connected to the HDD dock
simultaneously - a convenient solution for migrating data from an IDE drive to a SATA
drive or vice versa, or simply harnessing fast and simple access to the contents on both
hard drives.

Packaging Contents

• 1 x Universal Hard Drive Dock
• 1 x USB 3.0 Cable
• 1 x IDE 40 to 40-Pin Cable
• 1 x LP4 Power Cable
• 1 x 40-Pin + LP4 to 44-Pin IDE Cable
• 1 x Power Adapter
• 1 x Power Cord
• 1 x Instruction Manual

System Requirements

• USB enabled computer system with available USB 3.0 port
• Available AC electrical outlet
• Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or
Apple® Mac OS® X*, or Linux®
*If used with the Apple Mac OS operating system, this device will function in USB 2.0
mode only as Apple does not yet support USB 3.0
Instruction Manual
1