Draytek VigorAP 800 User Manual page 57

Status
Refresh
Start PBC
PIN Start
Renew PIN
Note: When you're using PBC type WPS setup, you must press PBC button (hardware or
software) of wireless client within 2 minutes. If you didn't press PBC button of wireless
client within this time period, please press PBC button (hardware or software) of this
access point again.
Display the status of WPS access point.
Click this button to refresh the AP site survey.
Click Start PBC to make a WPS connection within 2 minutes.
When using PinCode method, it is required to enter PIN Code
(Personal Identification Number Code, 8-digit numbers) into
Registrar. When the wireless station is Enrollee, the users can
use Renew PIN to re-generate a new PIN code.
Click this button to re-generate a new PIN code.
47
VigorAP 800 User's Guide