Related Manuals for Draytek VigorAP 805
Summary of Contents for Draytek VigorAP 805
- Page 1 VigorAP 805 802.11ac Access Point Quick Start Guide Version: 1.0 Firmware Version: V5.0.1 (For future update, please visit DrayTek web site) Date: November 27, 2024...
- Page 2 Intellectual Property Rights (IPR) Information © All rights reserved. This publication contains information that is protected Copyrights by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Trademarks Microsoft is a registered trademark of Microsoft Corp.
- Page 3 This product is designed for 2.4GHz and 5GHz WLAN network throughout the EC region. Declaration of Conformity Hereby, DrayTek Corporation declares that the equipment type VigorAP 805 is in compliance with the Radio Equipment Regulations 2017 (SI 2017 No.1206), The Electrical Equipment (Safety) Regulations 2016 (SI 2016 No.1101), and The Restriction of the Use of Certain Hazardous Substances in Electrical...
- Page 4 UK PSTI STATEMENT OF COMPLIANCE We, DrayTek Corp., office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole responsibility that the product The full text of the PSTI Declaration of Conformity is available at the following internet address: https://fw.draytek.com.tw/UK/PSTI/...
- Page 5 Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 6 24.0W 18.0W Average active efficiency 85.5% 86.96% 86.2% 85.21% Efficiency at low load 10% 79.3% 83.7% 77.5% 79.1% 80.1% No-load power 0.06W 0.07W 0.10W 0.10W 0.1W consumption * External power supply (Power Adapter) information. For more update, please visit www.draytek.com.
- Page 7 1. Package Content Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Access Point Quick Start Guide RJ-45 Cable (Ethernet) The type of the power adapter depends on the country that the AP will be installed:...
- Page 8 2. Panel Explanation Status Explanation On (Red) The system is in Loader mode. Blinking Slowly The system is in TFTP mode. (Red) Blinking (Red), The system failed due to some reason. just like an SOS signal Blinking The system is ready and can work normally. Slowly(white) Blinking The system is booting up or reset to the factory...
- Page 9 Interface Description Mesh button. Press it and release within 2 seconds. The LED will turn to blink in red, and the access point will start to connect to the Mesh network. Reset Restore the default settings. Usage: Turn on the router. Press the button and keep for more than 10 seconds.
- Page 10 Connect VigorAP 805 to xDSL modem, router, or switch/hub in your network through the LAN 1 or LAN2 port of the access point by Ethernet cable. You can also connect VigorAP 805 to a Vigor router via wireless connection. For detailed information, refer to VigorAP 805 User’s Guide.
- Page 11 Install VigorAP on the place you want. As a mesh node, settings related to VigorAP must be configured by a remote Mesh Root (e.g., VigorAP 805) within the mesh network. The user must detect VigorAP via a Mesh Root to add it as a mesh node.
- Page 12 You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be in the same subnet as the IP address of VigorAP 805. If there is no DHCP server on the network, then VigorAP ...
- Page 13 Next, the page will appear to guide you change the login password. You MUST change the login password before accessing the web user interface. Please set a new password for network security. After clicking Apply, the Main Screen will pop up. When the homepage appears, view the configuration and modify the settings if you want.
- Page 14 Method 2: Use a mobile phone to scan the QR code named with DrayTek Wireless App to download DrayTek Wireless APP. After opening the DrayTek website, use the scroll bar to locate the Wireless APP. Based on the mobile phone type (Android or iOS) you have, select the one you need to download the APP.
- Page 15 5. Customer Service If the device cannot work correctly after trying many efforts, please contact your dealer/DrayTek for further help right away. For any questions, please feel free to send e-mail to “support@draytek.com”. Be a Registered Owner Web registration is preferred. You can register your Vigor device via https://myvigor.draytek.com.
Need help?
Do you have a question about the VigorAP 805 and is the answer not in the manual?
Questions and answers