Table of Contents
Advertisement
802.1x WEP
Click the link of RADIUS Server to access into the following page for more settings.
IP Address
Port
Shared Secret
Session Timeout
Idle Timeout
3
.
3
.
3
A
c
c
e
s
s
3
.
3
.
3
A
c
c
e
s
s
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights (deny or allow).
VigorAP 800 User's Guide
and ','. Such feature is available for WEP mode.
Disable - Disable the WEP Encryption. Data sent to the AP
will not be encrypted.
Enable - Enable the WEP Encryption.
Such feature is available for WEP/802.1x mode.
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides must
be configured to use the same shared secret.
Set the maximum time of service provided before
re-authentication. Set to zero to perform another authentication
immediately after the first authentication has successfully
completed. (The unit is second.)
Set the maximum time that a wireless device may remain idle.
(The unit is second.)
C
o
n
t
r
o
l
C
o
n
t
r
o
l
28
Hide quick links:
Advertisement
Table of Contents
