Programming Channel Control Lock; To Activate Channel Control Lock; To De-Activate Channel Control Lock; Programming Audio Control - Universal Electronics MILLENNIUM 4 User Manual

PROGRAMMING CHANNEL
CONTROL LOCK
By activating this feature, the Millennium 4 will
only allow access to the channel control
capabilities of your cable converter. This will
guarantee that you do not inadvertently change
the channel on your TV or VCR.
To Activate Channel Control
Lock:
1. On the Millennium 4, press and
hold SETUP until the LED blinks
twice, then release SETUP.
2. Enter 9 - 9 - 6.The LED will blink
twice.
Press CH + once. The LED will
3.
blink twice.
4. Now, regardless of what mode you select
(i.e.,
TV, VCR, or CBL), only the channel
control capability of your cable converter
will be accessible.
NOTE: This feature does not affect the Audio mode.
To De-Activate Channel Control
Lock:
1. On the Millennium 4, press and hold
SETUP until the LED blinks twice, then
release SETUP.
2. Enter 9 - 9 - 6.The LED will blink twice.
3. Press CH – once. The LED will blink
twice.
The Millennium 4 will again provide TV
4. and VCR channel control capabilities
while in the TV or VCR mode.
21
PROGRAMMING AUDIO
CONTROL
Using the Millennium 4's Audio mode, you can
also control an audio component, such as CD or
DVD player, a stereo receiver, a stereo amplifier,
or a DBS audio service.
Locate the brand name of your audio component
in the one of accompanying code lists (starting
on the next page). Write it in the appropriate
space.
CD Player Brand:_________________________
or
DVD Player Brand:_______________________
or
Stereo Receiver Brand:____________________
or
Stereo Amplifier Brand:____________________
or
DBS Audio Brand:________________________
The brands are listed in alphabetical order with
popular codes listed first. You will use one of
these codes to program the Millennium 4 to
operate your audio component:
1. Turn on the audio component (or DBS receiver to
control its audio service).
2. On the Millennium 4, press AUDIO
once. Press and hold SETUP until the
LED blinks twice, then release SETUP
3. Enter the first four-digit code for your audio
component. If you perform this procedure
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice after entering the
code's last digit, then repeat steps 2 through 3 and try
entering the same code again.
4. Aim the Millennium 4 at your audio
component and press POWER once.
The unit should turn off. If it does not
respond, repeat steps 2-3, trying each
code listed for your brand until you find
one that works. If it still does not work ,
try searching for the code (see
Searching For Your Code on page 26).
5. Write your audio component code in the boxes
below for future reference.
22