Setup Codes For Stereo Amplifiers; Setup Codes For Dbs Audio Services; Searching For Your Code - Universal Electronics MILLENNIUM 4 User Manual

Setup Codes for Stereo Receivers
(continued):
RCA 0531
Sansui 0189
Sharp 0186
Sony 0158
Soundesign 0670
Teac 0463
Technics 0039, 0309
Victor 0074
Wards 0158, 0014, 0189, 0080
Yamaha 0176, 0186
Setup Codes for Stereo
Amplifiers:
Carver 0269
Curtis Mathes 0300
Denon 0160
JVC 0331
Linn 0269
Magnavox 0269
Marantz 0269
Panasonic 0308
Philips 0269
Pioneer 0013, 0300
Sony 0689
Technics 0308
Victor 0331
Wards 0013
Yamaha 0354
Setup Codes for DBS Audio
Services:
Jerrold 0459, 0520
Scientific Atlanta 0460
Starcom 0459
25

SEARCHING FOR YOUR CODE

If your TV, VCR, Cable Converter or Audio
Component does not respond to the Millennium
4 after trying all of the codes listed for your
brand, or if your brand is not listed at all, try
searching for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the Millennium 4, press and hold
SETUP until the LED blinks twice,
then release SETUP.
3. Enter 9 - 9 - 1.The LED will blink
twice.
4. Aim the remote control at the TV and
slowly alternate between pressing
POWER and TV. Stop when the TV
turns off.
NOTE: In the search mode, the Millennium 4
will send IR codes from its library to the
selected component, starting with the most
popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of your other
components, repeat steps 1 through 5,
but substitute the appropriate key (i.e.,
VCR, CBL, or AUDIO) for the (VCR,
Cable, or Audio) component you are
searching for.
26