Deleting All Learned Keys In A Specific Mode; Programming Channel Control Lock - Universal Electronics Potenza ST User Manual

3. Press the key containing the learned function
to be deleted twice. The active MODE key will
blink twice.
4. Repeat steps 2 through 3 for another key or
press and hold SETUP to exit programming.

Deleting All Learned Keys in a Specific Mode

NOTE:
If more than 15 seconds pass between key
presses, the remote exits programming.
1. Press and hold SETUP until the last-selected
mode key blinks twice, then press 9 7 6.
2. Press a mode key twice (i.e., VCR, DVD, AUD,
TV, or STB) to clear all the learned keys for that
mode. The mode key LED blinks twice.
3. Repeat step 2 for another mode or press and
hold SETUP to exit programming.

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control's channel-control
capabilities are locked to the set-top box. The affected
*
are 1 through 0, CH+, CH-, and LAST. This will
keys
guarantee that you do not inadvertently change a
channel on your TV or VCR. However, you can de-
activate this feature to allow full access to these keys in
the TV and VCR modes.
*
NOTE: This feature does not affect the AUD mode.
www.urcsupport.com
16