Programming Channel Control Lock; Locking Channel Control To Cbl/Sat - Universal Electronics MediaRemote User Manual

Media Remote Rev 1.fm Page 17 Monday, October 3, 2005 4:12 PM
Key Available Letters/Symbols
9 W, X, Y, Z, 9
DVD Video Menu Commands
In addition, if you are in the DVD Video
menu of SimpleCenter:
Press this
To...
key...
Move one selection up
the DVD Video menu
Move one selection
down the DVD Video
menu
Move one item left on
the DVD Video menu
For more information, see the
SimpleCenter online help.
PROGRAMMING
CHANNEL CONTROL LOCK
The MediaRemote with SimpleCenter
allows you to lock channel controls to the
device you programmed for the CBL/SAT
key. The affected keys are 0 through 9,
CH+, CH-, ENTER, and LAST. This will
guarantee that you do not inadvertently
change a channel on your TV. By default,
channel control lock is turned off.
NOTE: This feature does not affect the
AUDIO mode.
NOTE: If more than 10 seconds pass
between key presses, the remote
exits programming.

Locking Channel Control to CBL/SAT

1. Press and (rewind and fast
forward) at the same time until the
power key blinks twice.
2. Enter 9 7 3. The power key blinks
twice.
3. Press CH+ once. The power key
blinks twice.
Now, regardless of what mode you select
(except AUDIO), the channel keys will
only change channels on the device you
programmed for the CBL/SAT key.
17