LaCie Wireless Space User Manual
  1. Manuals
  2. Brands
  3. LaCie Manuals
  4. Network Hardware
  5. Network Space MAX
  6. User manual

LaCie Wireless Space User Manual

Design by neil poulton
Hide thumbs Also See for Wireless Space:
Table of Contents

Advertisement

Quick Links

Download this manual
LaCie Wireless Space
User Manual

Table of Contents

1. Introduction................................................................................................................. 6
1.1. How to use this manual ................................................................................................................. 7
1.2. Minimum Computer and Network Requirements . ............................................................................. 8
1.2.1. Computer ........................................................................................................................ 8
1.2.2. Network . .......................................................................................................................... 8
1.3. Box Content ................................................................................................................................. 9
1.4. Views of the Drive ....................................................................................................................... 10
1.4.1. Front View ..................................................................................................................... 10
1.4.2. Rear View ...................................................................................................................... 10
1.5. Power Button Functions ............................................................................................................... 11
1.6. Gigabit Ethernet Cables And Connectors ...................................................................................... 12
1.7. Wireless Signal - 802.11b/g/n . .................................................................................................... 12
1.8. Light Behavior............................................................................................................................. 13
1.9. Default Settings . .......................................................................................................................... 14
2. What is the best configuration for my network? ........................................................ 15
2.1. Configuration 1: Ethernet NAS - Wired Only ................................................................................ 16
2.2. Configuration 2: NAS Wireless Client ........................................................................................... 17
2.3. Configuration 3: NAS Wireless Access Point . ................................................................................ 18
2.4. Configuration 4: NAS Router - Wired Only ................................................................................... 19
2.5. Configuration 5: NAS Router - Wireless Access Point ..................................................................... 20
3. Basic Installation ....................................................................................................... 21
3.1. Connect the Power Supply ........................................................................................................... 21
3.2. Configuration 1: NAS Ethernet - Wired Only ................................................................................ 22
3.2.1. Wireless Space Setup Wizard . .......................................................................................... 22
3.3. Configuration 2: NAS Wireless Client ........................................................................................... 24
3.3.1. Wireless Space Setup Wizard . .......................................................................................... 24
3.4. LaCie Network Assistant .............................................................................................................. 28
3.5. Accessing and Transferring Files . .................................................................................................. 31
3.5.1. About Shares ................................................................................................................. 31
3.5.2. Accessing Shares Using LaCie Network Assistant ............................................................... 32
3.5.3. Map Shared Folders ....................................................................................................... 35
3.5.4. LaCie Network Assistant Auto Mount ................................................................................ 37
3.5.5. Accessing Shares Using File Browser ................................................................................ 38
3.5.6. Accessing Shares via FTP . ................................................................................................ 39
3.5.7. Multimedia Server . .......................................................................................................... 40
3.5.8. iTunes Music Server ........................................................................................................ 40
3.6. Administering Your LaCie Wireless Space . ..................................................................................... 42
3.6.1. Dashboard: Accessing .................................................................................................... 43
3.6.1.1. Use LaCie Network Assistant.......................................................................................43
3.6.1.2. Use a Browser...........................................................................................................43
3.6.2. Dashboard: Welcome Page . ............................................................................................ 44
3.6.3. Dashboard: Navigation................................................................................................... 44
3.6.4. Dashboard: Shut Down or Restart the Wireless Space ........................................................ 44
3.6.5. Dashboard: General Settings . .......................................................................................... 45
3.6.5.2. Time Machine™.........................................................................................................46
• DESIGN BY NEIL POULTON
Table of Contents
page 1

Advertisement

Table of Contents
loading

Related Manuals for LaCie Wireless Space

Summary of Contents for LaCie Wireless Space

  • Page 1: Table Of Contents

    3.2. Configuration 1: NAS Ethernet - Wired Only ................22 3.2.1. Wireless Space Setup Wizard ................... 22 3.3. Configuration 2: NAS Wireless Client ................... 24 3.3.1. Wireless Space Setup Wizard ................... 24 3.4. LaCie Network Assistant ......................28 3.4.1. Connect to the LaCie Wireless Space Dashboard using LaCie Network Assistant ....29 3.4.2. Connect to the LaCie Wireless Space Dashboard directly from the browser ......30 3.5. Accessing and Transferring Files ....................31 3.5.1. About Shares ......................... 31 3.5.2. Accessing Shares Using LaCie Network Assistant ............... 32 3.5.3. Map Shared Folders .......................
  • Page 2 LaCie Wireless Space Table of Contents • DESIGN BY NEIL POULTON User Manual page 2 3.6.6. Dashboard: Network LAN ....................47 3.6.6.1. IP Address and Remote Access..................47 3.6.7. Dashboard: Drives ......................49 3.6.8. Dashboard: Support ....................... 50 3.6.8.1. Firmware, Resetting the device, and Light..............50 3.6.9. Dashboard: Download....................53 3.6.9.1. Upload .torrent files....................53 3.6.10. Dashboard: Mode ......................55 3.6.10.1. Configuration Basics....................56 3.6.10.2. Changing the Configuration Example: Wired Only to Wireless Client......58 3.6.11. Dashboard: Wireless Client .....................
  • Page 3 User Manual page 3 Copyrights Trademarks FCC Statement Copyright © 2010 LaCie. All rights re- Apple, Mac, Time Machine, and Macin- served. No part of this publication may tosh are registered trademarks of Apple LaCie Wireless Space be reproduced, stored in a retrieval sys- Computer, Inc. Microsoft, Windows XP,...

  • Page 4: General Use Precautions

    General Use Precautions Federal Communication Commission This symbol on the product Interference Statement or on its packaging indicates ✦ Do not expose the LaCie Wireless that this product must not be FCC Caution: Any changes or modifica- Space to temperatures outside the disposed of with your other range of 5° C to 35° C (41° F to tions not expressly approved by the party household waste. Instead, it...
  • Page 5 INFO: Any loss, corruption or destruction of data while using a LaCie drive is the sole responsibility of the user, and under no circumstances will LaCie be held liable for the recovery or restoration of this data. To help prevent the loss of your data, LaCie highly recommends that you keep TWO copies of your data; one copy on your external hard disk, for instance, and a second copy either on your internal hard disk, another external hard disk or some other form of removable storage media. LaCie offers a complete line of CD and DVD drives. If you would like more information on backup, please refer to our web site. IMPORTANT INFO: 1GB = 1,000,000,000 bytes. 1TB = 1,000,000,000,000 bytes. Once formatted, the actual available storage capacity varies depending on operating environment (typi- cally 10% less).

  • Page 6: Introduction

    1. Introduction Congratulations on your purchase of a LaCie Wireless Space, De- sign by Neil Poulton. Built to enhance an existing network or to cre- ate a new one, the LaCie Wireless Space offers expansive shared storage and superior performance. Best of all, the Wireless Space lives up to its name, giving you the freedom to connect to your network using Wi-Fi. With its large capacity hard drive for storing...

  • Page 7: How To Use This Manual

    LaCie Wireless Space Introduction • DESIGN BY NEIL POULTON User Manual page 7 1.1. How to use this manual Unlike many standard network attached storage (NAS) devices, the LaCie Wireless Space can be integrated into a network in several ways. While it is, above all, a network drive with a large capacity for data and media, the Wireless Space is also a router, a server, a Wi-Fi access point, and much more. The Wireless Space has easy- to-use features that allow for the networking novice to dive in im- mediately, as well as advanced features for those who want to move their home or small business networks to the next level. LaCie wants you to have fun with your new Wireless Space, taking advantage of its expansive set of features. This User Manual will help you determine the configuration that best suits the demands of your network as well as offer ideas on how to grow in the future.

  • Page 8: Minimum Computer And Network Requirements

    *Please see 2. What is the best configuration for my network? for more information on the optimal configuration for your Wireless Space. **Ethernet 100/1000 indicates network transfer rates of 100 Megabits (Mb) per second or 1000 Mb per second; 1000 Mb is equal to 1 Gigabit (Gb). LaCie recommends using Ethernet 1000 Mb/s connections for better performance. Please see 1.6. Gigabit Ethernet Cables And Connectors for more information. IMPORTANT INFO: The LaCie Wireless Space’s performance TECHNICAL NOTE: For optimal performance, use a Fast Ethernet can be affected by such external forces as network activity, hard- device to connect the Wireless Space to the Internet and a Fast Eth- ware, distance, and setup. ernet board in your host computer(s).

  • Page 9: Box Content

    LaCie Wireless Space Introduction • DESIGN BY NEIL POULTON User Manual page 9 1.3. Box Content LaCie Wireless Space External power supply Gigabit Ethernet cable Quick Install Guide CD-ROM with software utilities and the User Manual IMPORTANT INFO: Please save your packaging. In the event that the drive should need to be repaired or serviced, it must be returned in its original packaging. wireless space D E S I G N BY N E I L P O U LTO N...

  • Page 10: Views Of The Drive

    LaCie Wireless Space Introduction • DESIGN BY NEIL POULTON User Manual page 10 1.4. Views of the Drive 1.4.1. Front View WPS Button: Join Wi-Fi networks that support WPS (Wi-Fi Pro- tected Setup) or turn the Wi-Fi on/off: ✦ Quick touch: the Wireless Space searches for a WPS network to join while the light flashes blue and green. See the user manual of your WPS device for details on joining its network. ✦ Long touch: the Wi-Fi access point is turned on (blue light) or off (green light).

  • Page 11: Power Button Functions

    LaCie Wireless Space Introduction • DESIGN BY NEIL POULTON User Manual page 11 1.5. Power Button Functions The multi-function power button (1.4.2. Rear View) allows you to turn the device on/off, reboot, or revert the system to its default configuration.

  • Page 12: Gigabit Ethernet Cables And Connectors

    LaCie Wireless Space Introduction • DESIGN BY NEIL POULTON User Manual page 12 1.6. Gigabit Ethernet Cables And Connectors Your LaCie Wireless Space is shipped with an Ethernet cable (Fig. 03 - Gigabit Ethernet Cable) that is compatible with transfer rates up to 1000 Mb/s, or 1 Gb/s. Often referred to as “Gigabit Ethernet” Fig. 03 - Gigabit Ethernet Cable or “Gig-E”, this level of Ethernet connection is superior to older, 100 Mb/s connections. The Gigabit Ethernet cable should be used to connect your LaCie Wireless Space to your network router, switch, or Internet provider for all configurations. The ends of the cable are the same, making...

  • Page 13: Light Behavior

    LaCie Wireless Space Introduction • DESIGN BY NEIL POULTON User Manual page 13 1.8. Light Behavior The front light changes color and status to indicate drive, Wi-Fi, and operational behavior (Fig. 04). Light Behavior Indication ✦ Device is turned off ✦ Light has been turned off using the Dashboard (see 3.6.8.1. Firmware, Resetting the device, Light) Blue: Fast blinking ✦ Drive is initializing Blue: Static ✦...

  • Page 14: Default Settings

    LaCie Wireless Space Introduction • DESIGN BY NEIL POULTON User Manual page 14 1.9. Default Settings IMPORTANT INFO: DO NOT attempt to access the Wireless Space via the web-enabled Dashboard (see 3.6.1. Dashboard: Ac- cessing) before running the Setup Wizard. During the initial con- figuration, the Setup Wizard must find the Wireless Space on the network. If the Dashboard has made contact with the device, the...

  • Page 15: What Is The Best Configuration For My Network

    LaCie Wireless Space Wireless Space Configuration • DESIGN BY NEIL POULTON User Manual page 15 2. What is the best configuration for my network? The Wireless Space is flexible, offering five configurations. to work with most networks. No matter how it is used, the Wireless Space disk drive is always available to share files or backup on the network. Please see the table below for a brief summary of each configura- tion. Base Mode Configuration Ethernet Wi-Fi Access Networks Installation Point* NAS + Switch NAS Ethernet - Wired Up to 1 Gb/s ✦...

  • Page 16: Configuration 1: Ethernet Nas - Wired Only

    LaCie Wireless Space Wireless Space Configuration • DESIGN BY NEIL POULTON User Manual page 16 2.1. Configuration 1: Ethernet NAS - Wired Only The Wireless Space acts as network attached storage and a switch, providing additional ports to expand the devices on the network. Fig. 05 Case Example Networks with a router, server, or Internet provider that manages the network may not require an additional router to manage a separate network. Further, the Wi-Fi access point feature is kept off on the Wireless Space if it is not required.

  • Page 17: Configuration 2: Nas Wireless Client

    LaCie Wireless Space Wireless Space Configuration • DESIGN BY NEIL POULTON User Manual page 17 2.2. Configuration 2: NAS Wireless Client The Wireless Space joins an existing Wi-Fi network to: ✦ Provide wireless network attached storage ✦ Extend Ethernet connectivity Fig. 06 Case Example The router, switch, or Internet provider offers sufficient management and Wi-Fi features for the network. However, there is a need for network attached storage. Additionally, devices that are not Wi-Fi...

  • Page 18: Configuration 3: Nas Wireless Access Point

    LaCie Wireless Space Wireless Space Configuration • DESIGN BY NEIL POULTON User Manual page 18 2.3. Configuration 3: NAS Wireless Access Point The Wireless Space joins an existing wired network via an Ethernet cable. The Wireless Space adds network storage, switch connectiv- ity, and a Wi-Fi access point for wireless clients. Fig. 07 Case Examples ✦ An existing network is managed by a server, router, or Inter- net provider that does not offer a Wi-Fi signal. The Wireless Space connects to the network device in order to add network attached storage and a Wi-Fi access point. Ethernet LAN ports on the Wireless Space are available for devices that require a wired connection to the network. Configuration Installation and Why? ✦ An existing network is managed by a server, router, or Internet provider with a Wi-Fi 802.11b/g signal. The Wireless Space...

  • Page 19: Configuration 4: Nas Router - Wired Only

    LaCie Wireless Space Wireless Space Configuration • DESIGN BY NEIL POULTON User Manual page 19 2.4. Configuration 4: NAS Router - Wired Only The Wireless Space creates its own network and connects directly to the existing wide area network (WAN) for access to the Internet. The Wireless Space connects to the WAN using an Ethernet cable. Devices connected to the Wireless Space LAN ports have access to Fig. 08 its shared storage. Case Examples ✦...

  • Page 20: Configuration 5: Nas Router - Wireless Access Point

    LaCie Wireless Space Wireless Space Configuration • DESIGN BY NEIL POULTON User Manual page 20 2.5. Configuration 5: NAS Router - Wireless Access Point The Wireless Space creates its own network and connects directly to the existing wide area network (WAN) for access to the Internet. The Wireless Space connects to the WAN using an Ethernet cable and Fig. 09 offers a Wi-Fi access point for wireless devices. Devices connected to the Wireless Space LAN ports and its Wi-Fi access point have ac- cess to the shared storage. Case Examples ✦ A second network is created for security or to separate devices in an existing network. A Wi-Fi access point is added to en- hance connectivity. Configuration Installation and...

  • Page 21: Basic Installation

    With a configuration in mind, you may run the Setup Wizard and connect to your network. 3.1. Connect the Power Supply 1. Connect the power supply to a wall outlet and to the LaCie Wireless Space (Fig. 10). Push the rear power button for five seconds to turn it on (Fig. 11). The front light will indicate that the device is booting by turning green (Wi-Fi disabled) or blue (Wi-Fi enabled). The light...

  • Page 22: Configuration 1: Nas Ethernet - Wired Only

    Functions). In most instances, the light will become solid green and turn red during the setup. 2. Run the Utilities CD from the computer’s optical disk drive. When prompted, launch the Wireless Space Setup. DO NOT install LaCie Network Assistant before running the Wireless Space Setup. 3. Choose your language then select OK. After reading the wel- come screen text, click Continue. Select Do not enable Wi-Fi. Click Continue. (Fig. Select NAS. Click Continue. (Fig.
  • Page 23 23 6. You will be prompted to connect your computer to the Wireless Space. Please use one of the three ports marked LAN1, LAN2, or LAN3 on the back of the Wireless Space (1.4.2. Rear View). DO NOT connect the cable to the port named INTERNET (Fig. Attach the computer to 14). LaCie recommends a Gigabit Ethernet cable for optimal LAN1, LAN2, or LAN3. performance (1.6. Gigabit Ethernet Cables And Connectors). 7. Once the Wireless Space has been connected to the computer, click Continue. 8. The Setup will search for your Wireless Space. Move to the next step if the device is found. If not, please reinsert the Ethernet...

  • Page 24: Configuration 2: Nas Wireless Client

    Functions). In most instances, the light will become solid green and turn red during the setup. 2. Run the Utilities CD from the computer’s optical disk drive. When prompted, launch the Wireless Space Setup. DO NOT install LaCie Network Assistant before running the Wireless Space Setup. continued on the next page>>...
  • Page 25 Select Enable Wi-Fi. Click Continue. (Fig. Select NAS Extender Ethernet. Click Continue. (Fig. 6. You will be prompted to connect your computer to the Wireless Space. Please use one of the three ports marked LAN1, LAN2, or LAN3 on the back of the Wireless Space (1.4.2. Rear View). DO NOT connect the cable to the port named INTERNET (Fig. 19). LaCie recommends a Gigabit Ethernet cable for optimal performance (1.6. Gigabit Ethernet Cables And Connectors). 7. Once the Wireless Space has been connected to the computer, click Continue. Fig. 17 8. The Setup will search for your Wireless Space. Move to the next step if the device is found. If not, please reinsert the Ethernet connections on the Wireless Space and the computer before trying again.
  • Page 26 LaCie Wireless Space Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 26 9. Choose between Connect using WPS to an existing Wi-Fi or Connect manually to an existing Wi-Fi. Click Continue. The Wireless Space Setup will search for available Wi-Fi networks. IMPORTANT INFO: Each Wi-Fi access point is listed by its name, or SSID. The Wireless Space can join an access point with an SSID that includes letters (uppercase and lowercase), whole numbers, and the following symbols: . _ % + - = @ #...
  • Page 27 LaCie Wireless Space Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 27 15. Disconnect the Wireless Space from the computer and, if nec- essary, move the device to its new location. 16. You may connect devices such as computers or game systems to the Wireless Space similar to a router or switch. Please use one of the three ports marked LAN1, LAN2, or LAN3 on the back of the Wireless Space (1.4.2. Rear View). DO NOT connect the cable to the port named INTERNET (1.4.2. Rear View). LaCie recommends a Gigabit Ethernet cable for optimal performance (1.6. Gigabit Ethernet Cables And Connectors). Other devices on your network, such as computers or gaming systems, may use the available LAN ports. See 3.7. INTERNET Port: NAS+Switch for further information on the INTERNET port.

  • Page 28: Lacie Network Assistant

    LaCie Wireless Space LaCie Network Assistant • DESIGN BY NEIL POULTON User Manual page 28 3.4. LaCie Network Assistant IMPORTANT INFO: You must run the Wireless Space Setup Wiz- ard before installing LaCie Network Assistant. LaCie Network Assistant is a convenient software that detects all LaCie network attached storage on your home or business network. Once installed and running, LaCie Network Assistant will appear in the system tray (Windows, Fig. 23) or the menu bar (Mac, Fig. 24). LaCie Network Assistant automatically searches for LaCie network Fig. 23 storage devices and the icon will blink if a new device is found,. When LaCie Network Assistant finds your Wireless Space, you can view information about the device (i.e. network addressing) or con-...

  • Page 29: Connect To The Lacie Wireless Space Dashboard Using Lacie Network Assistant

    29 3.4.1. Connect to the LaCie Wireless Space Dashboard using LaCie Network Assistant 1. Launch LaCie Network Assistant. Windows Users a. Select LaCie Network Assistant in Start/Programs. A LaCie Network Assistant icon will appear in the system tray (Fig. Fig. 26 26). LaCie Network Assistant automatically detects the Wire- less Space as well as other LaCie network devices. (Fig. Click on the icon in the system tray and select Configuration Window... from the LaCie Wireless Space sub-menu...

  • Page 30: Connect To The Lacie Wireless Space Dashboard Directly From The Browser

    LaCie Wireless Space LaCie Network Assistant • DESIGN BY NEIL POULTON User Manual page 30 3.4.2. Connect to the LaCie Wireless Space Dashboard directly from the browser LaCie Network Assistant offers a simple way to connect to your La- Cie network attached device (3.4.1. Connect to the LaCie Wireless Space Dashboard using LaCie Network Assistant). However, there Fig. 30...

  • Page 31: Accessing And Transferring Files

    INFO: As noted in the chart below, the Wireless There are several ways to access and transfer files located on the Space accepts many formats for external storage attached to one of Wireless Space. Follow the links below for more details. its three USB 2.0 ports. However, the Mac format HFS+ Journaled is not supported. The Wireless Space will see a volume partitioned in HFS+ Journaled in the Dashboard but cannot copy files to it or 3.5.2. Accessing Shares Using LaCie Network Assistant mount it on a computer. 3.5.3. Map Shared Folders 3.5.5. Accessing Shares Using File Browser IMPORTANT INFO: On a Mac, the icon marked “Wireless Space (Time Machine)” under Shared is a virtual representation for a Time 3.5.6. Accessing Shares via FTP Machine compatible disk. It is not a volume for use on the desktop.

  • Page 32: Accessing Shares Using Lacie Network Assistant

    34). b. Select LaCie Network Assistant from the system tray. Choose OpenShare (Fig. 35 - LaCie Network Assistant: No External Storage) or a volume from an attached USB storage drive (Fig. 36 - LaCie Network Assistant: External USB Stor- age). The drive window will open, allowing for standard Fig. 35 - LaCie Network Assistant: No External USB Storage desktop actions such as dragging, dropping, copying, past- ing, etc.
  • Page 33 LaCie Wireless Space Accessing & Transferring Files • DESIGN BY NEIL POULTON User Manual page 33 To access all shares and volumes, including MyShare : 1. Launch LaCie Network Assistant and click on its icon in the sys- tem tray (Windows) or menu bar (Mac). 2. Choose Configuration Window... to launch the configuration page (Fig. 37). 3. Choose the Volumes tab to view OpenShare and all USB vol- umes currently attached to the Wireless Space (Fig.
  • Page 34 LaCie Wireless Space Accessing & Transferring Files • DESIGN BY NEIL POULTON User Manual page 34 5. All shares and USB volumes (if applicable) are now available in the Volumes tab (Fig. 40). 6. Right-click on a share or USB volume for options on mounting (Fig. 41) or double-click to open it immediately. 7. LaCie Network Assistant provides a green icon to let you know that the share or USB volume is mounted (Fig. 42). You may search Network (Windows) or Shared (Mac) to access the shares and volumes.

  • Page 35: Map Shared Folders

    From Fig. 44 ✦ Select a letter for the drive. ✦ Check the box for Reconnect at logon to mount the shares or volumes each time you log on to the computer. See Fig. 43 3.5.4. LaCie Network Assistant Auto Mount for informa- tion on how to mount Wireless Space Shares using LaCie Network Assistant. ✦ Click Browse to search the network for your share or USB volume connected to the Wireless Space. 3. Select the share or volume you want to mount and click OK. Click Finish for the share to open. It is now listed with...
  • Page 36 1. From the Apple icon in the menu bar, select System Preferences>Accounts>Login Items. Choose your account Fig. 46 name on the left of the window. Click on the + sign (Fig. 46) to add a new item to the list and browse for the shares (Fig. 47). Please note that the shares must be mounted before attempting to add them to the list. Click Add. 3. When you log on to the Mac OS, the share(s) will automati- cally mount on your desktop. See 3.5.4. LaCie Network Assistant Auto Mount for information on how to mount Wireless Space shares using LaCie Network Assistant. Fig. 47 Fig. 48...

  • Page 37: Lacie Network Assistant Auto Mount

    LaCie Wireless Space Accessing & Transferring Files • DESIGN BY NEIL POULTON User Manual page 37 3.5.4. LaCie Network Assistant Auto Mount LaCie Network Assistant provides a simple feature to mount Wireless Space shares and USB volumes (if applicable) each time you log onto the computer. From the system tray (Windows) or menu bar (Mac), go to LaCie Network Assistant>Configuration Window...>Volumes. Enable the check box for Auto Mount next to the preferred shares. To disable this feature, deselect the check box.

  • Page 38: Accessing Shares Using File Browser

    LaCie Wireless Space Accessing & Transferring Files • DESIGN BY NEIL POULTON User Manual page 38 3.5.5. Accessing Shares Using File Browser The Dashboard features an interactive file browser that allows you to manage and transfer files. Follow these steps to open the file browser: Log in to the Dashboard (see section 3.6.1. Dashboard: Access- for details).

  • Page 39: Accessing Shares Via Ftp

    LaCie Wireless Space Accessing & Transferring Files • DESIGN BY NEIL POULTON User Manual page 39 3.5.6. Accessing Shares via FTP The FTP protocol is used to transfer files from one computer to an- other through a local network or over the internet. This protocol al- lows you to exchange files with your friends or relatives securely, as only people who know the password will have access. MANUAL NOTE: The FTP service is enabled by default. To change the setting, see 3.6.5. Dashboard: General Settings. To connect to the Wireless Space remotely via FTP, enter the address information in your FTP software (Fig. 52) or in the URL bar of a web browser (Fig. 53): ftp://[IP address] Fig. 52 TECHNICAL NOTE: See 3.4. LaCie Network Assistant for instruc- tions on finding your Wireless Space’s IP address.

  • Page 40: Multimedia Server

    LaCie Wireless Space Accessing & Transferring Files • DESIGN BY NEIL POULTON User Manual page 40 3.5.7. Multimedia Server You may configure your Wireless Space to act as a UPnP multimedia server. Follow these steps: 1. If it has been disabled, turn on Media Servers in the Wireless Space Dashboard (see 3.6.5. Dashboard: General Settings) (Fig. 54). 2. Now you may play files from your Wireless Space. UPnP/DLNA- certified players on your network (such as an XBox 360™, Play Station® 3, a DLNA mobile phone, etc.) can play back media files located on OpenShare and USB...
  • Page 41 LaCie Wireless Space Accessing & Transferring Files • DESIGN BY NEIL POULTON User Manual page 41 Access shared playlists in iTunes (Fig. 56). TECHNICAL NOTE: The iTunes Server Service supports the follow- ing file types: .mp3, .wav, and .aac. TECHNICAL NOTE: The server feature must also be enabled in the iTunes preferences: Preferences > Sharing > Look for shared libraries. Fig. 56...

  • Page 42: Administering Your Lacie Wireless Space

    Administering Your LaCie Wireless Space - Beyond Basic. Fig. 57 3.6.1. Dashboard: Accessing 3.6.2. Dashboard: Welcome Page 3.6.3. Dashboard: Navigation 3.6.4. Dashboard: Shut Down or Restart the Wireless Space 3.6.5. Dashboard: General Settings 3.6.6. Dashboard: Network LAN 3.6.7. Dashboard: Drives 3.6.8. Dashboard: Support 3.6.9. Dashboard: Download 3.6.10.

  • Page 43: Dashboard: Accessing

    Connect to the LaCie Wireless Space Dashboard directly from the browser). 3.6.1.1. Use LaCie Network Assistant 1. From the system tray (Windows users) or menu bar (Mac users), select LaCie Network Assistant>Web Access… The LaCie Wireless Space login page will launch in a new browser window or tab (Fig. 58). If your browser is not open, Fig. 58 LaCie Network Assistant will open it for you.

  • Page 44: Dashboard: Welcome Page

    LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 44 3.6.2. Dashboard: Welcome Page The welcome page contains links to helpful documents from the LaCie web site (Fig. 61, a) and a table listing the different pages that make up the Dashboard (Fig. 61, b). The center of the Dashboard provides all the information for a specific setting. The welcome page in Fig. 61 displays the minimum “widgets” for the LaCie Wireless Space Dashboard, which is normal for the Ethernet NAS - Wired Only configuration.

  • Page 45: Dashboard: General Settings

    LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 45 3.6.5. Dashboard: General Settings This page allows you to choose or modify some of your Wireless Space’s basic settings. For a change to take effect, select APPLY at the bottom of the main area of the Dashboard. 3.6.5.1. Names, Date & Time, iTunes & Media Server, and Login &...

  • Page 46: Time Machine

    LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 46 3.6.5.2. Time Machine™ Time Machine support is turned on by default. With Time Machine support selected, an icon marked “Wireless Space (Time Machine)” will appear in the Shared section of a Finder Window below the standard Wireless Space icon. The Wireless Space (Time Machine) icon is a virtual representation for a Time Machine compatible disk. It is not a volume for use on the desktop. MyShare, OpenShare, and USB volumes connected to the Wireless Space may be used on the desktop. Provided that...

  • Page 47: Dashboard: Network Lan

    Dynamic DNS account with a third-party provider. Please note that there are many companies that offer free remote Fig. 68 access service using Dynamic DNS (see Fig. 69 displaying the pull- down menu of third-party services from the Dashboard). Once you have selected a company and created an account on its web site, enter the pertinent information in the fields: Full Hostname, Account, and Password ✦ For more information, view LaCie’s screencast tutorial on setting up Dynamic DNS at: http://www.lacie.com/us/support/faq/faq. htm?faqid=10706 Fig. 69 continued on the next page>>...
  • Page 48 LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 48 Remote management In addition to Dynamic DNS, remote access to the Dashboard may be configured using HTTP and HTTPS. It is also possible to access files stored on the Wireless Space using an FTP address. Enable one or all options and look to your DHCP server to provide the address- ing information required to access the Wireless Space from a loca- tion outside the network. Your router, switch, or Internet provider must support UPnP IGD and/or NAT-PMP. Please make certain to have a secure login and password since...

  • Page 49: Dashboard: Drives

    LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 49 3.6.7. Dashboard: Drives Manual and automatic backups of USB hard drives connected to the Wireless Space are easy to manage using this page. For a change to take effect, select APPLY at the bottom of the main area of the Dashboard. External USB 2.0 devices may be attached to any of the three USB 2.0 ports on the front (1.4.1. Front View) or rear (1.4.2. Rear View) of the Wireless Space. Fig. 70 shows the Drives page with only Wireless Space internal disk. Manual Backup Fig. 71 has two USB storage drives attached to the Wireless Space. In this case, disk 1 will backup its data to the Wireless Space. To begin a manual backup, select the “copy from” icon (Fig. 71, a) on Fig. 70 an external hard drive and the “copy to” icon on the Wireless Space...

  • Page 50: Dashboard: Support

    Automatic upgrade ✦ The Wireless Space will search for firmware updates. ✦ This feature is turned on by default. To turn it off, deselect the checked box. Firmware ✦ View the version and date of the software installed on the Wireless Space. ✦ In order to maintain the performance of its products, LaCie Fig. 74 releases periodic firmware updates. If an update file is avail- able for the Wireless Space: 1. Download it from LaCie’s web site, www.lacie.com. 2. Once the file (.CLUFF) has been downloaded to your sys- tem, select UPLOAD>Choose File...
  • Page 51 LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 51 3. Choose SEND to update your Wireless Space (Fig. 76). Please be patient while the device updates and auto- matically restarts. Upon reboot, the light flashes red/blue/ green as notification that the update is in process. Once finished, the light will turn back to blue (Wi-Fi active) or green (Wi-Fi inactive) based upon the mode you are using.
  • Page 52 LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 52 There are three options for resetting the device (Fig. 78): a. Reset factory configuration. The firmware (if it has been up- dated since the initial setup) and data remain intact. Once this option is checked, select APPLY. The Wireless Space will reboot to the default configuration, NAS Router - Wired Only. b. Restore original software version (data preserved). The Wire- less Space firmware and configuration (NAS Router - Wired Only) revert to their defaults. Once this option is checked, select APPLY.

  • Page 53: Dashboard: Download

    LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 53 3.6.9. Dashboard: Download Save .torrent files directly onto MyShare with the Download page. Browse your computer for .torrent files to upload or save them from another location (network server, network device, Internet, etc). For a change to take effect, select APPLY at the bottom of the main area of the Dashboard. IMPORTANT INFO: Due to their small size and efficient use of bandwidth, torrents are very popular for downloading large files.
  • Page 54 LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 54 Browse your computer for a .torrent file (Fig. Click SEND (Fig. 84) to add the .torrent to the Download Pool (Fig. MyShare Target Disk If you are downloading files from a server or the Internet, you can choose MyShare as the target disk. The Download Pool will see any .torrent file on MyShare and add it to the list or watched folder. To act as the target disk, MyShare must be mounted on your computer (3.5.2. Accessing Shares Using LaCie Network Assistant). Fig. 83 Fig. 84 Fig. 85...

  • Page 55: Dashboard: Mode

    Fig. 86 There are five possible configurations for the LaCie Wireless Space (2. What is the best configuration for my network?) but this section will cover the two that are considered Basic: NAS+Switch - No Wire- less (“NAS Ethernet - Wired Only”) and Wireless Client (“NAS Wire- less Client”). Both are easy to install and require very little manage- ment of the network router, switch, or Internet provider. For further information on Beyond Basic configurations, see 4.5. Administering Your LaCie Wireless Space - Beyond Basic. Mode Window The Mode page has three main sections (Fig. 86): a. The heart of the Wireless Space, Base Mode and IP Con- figuration.

  • Page 56: Configuration Basics

    LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 56 3.6.10.1. Configuration Basics Select a pulldown menu to change the Base Mode, Wireless Con- figuration, and IP Configuration Mode. Base Mode has NAS+Switch and NAS+Router as choices ✦ (Fig. 87). For more information on NAS+Router, see 4.1. Be- fore the Installation. Switching the Base...
  • Page 57 LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 57 IP Configuration Mode (Fig. 89) lets you select between: ✦ 1. DHCP. Since it offers ease of use and convenience, most homes and businesses have DHCP servers that assign IP addresses to all the devices on the network. DHCP is high- ly recommended since it requires very little management of the Internet provider. 2. IP. If the network does not have a DHCP server or router to assign IP addresses, select Static in the IP Configuration Mode pulldown menu (Fig. 89). It is important to know all the pertinent information for the Static IP fields (Fig. 90). Static IP When using a Static IP, make certain to know how to fill in the fields seen in Fig. ✦ IP - your router, switch, or Internet provider has a range of Fig. 89...

  • Page 58: Changing The Configuration Example: Wired Only To Wireless Client

    LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 58 3.6.10.2. Changing the Configuration Example: Wired Only to Wireless Client Due to its flexibility as a network switch or router, the Wireless Space can grow with a network or adapt to different environments. The initial screenshots in this section are from the simplest configura- tion, NAS Ethernet - Wired Only, which is a robust network disk and a simple switch for Ethernet expansion. Moving to the next Basic...
  • Page 59 LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 59 Security Most routers, switches, or Internet providers have at least one level of security. To make the change in configuration as easy as possible, please take the time to read the user manual of your network router and/or Wi-Fi access point. For this change on the Mode page, con- sider the following questions: Security (Fig. ✦ 1. What is the name (SSID) of the Wi-Fi access point? In Wireless Client mode, the Wireless Space accepts letters (uppercase and lowercase), whole numbers, and the fol- lowing symbols: . _ % + - = @ #...
  • Page 60 LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 60 Simple Steps to a New Configuration IMPORTANT INFO: While the Wireless Client will extend a Wi-Fi signal to another room, LaCie recommends running the Setup Wiz- ard or changing the settings in the Dashboard close to the access point. It is far easier to manage the installation within proximity of both devices. To make the change from No Wireless to Wireless Client (Fig. 93): 1. Keep the Base Mode at NAS+Switch Change the Mode to Wireless client (Wireless NAS) 3. Enter the SSID (the name of the Wi-Fi access point) Fig. 93 4. Choose the Security (WEP or WPA) of the Wi-Fi access point 5. Enter the security code (WEP or WPA password security key of the wireless access point).
  • Page 61 11. Please be patient and wait a minute before attempting to re- launch the Dashboard. Note that the light will change from green (Wi-Fi inactive) to blue (Wi-Fi active) Fig. 95 12. When the light turns solid blue, reconnect with the Dashboard (3.4.1. Connect to the LaCie Wireless Space Dashboard using LaCie Network Assistant & 3.4.2. Connect to the LaCie Wire- less Space Dashboard directly from the browser) to confirm the change in configuration.

  • Page 62: Dashboard: Wireless Client

    LaCie Wireless Space Administering The LaCie Wireless Space • DESIGN BY NEIL POULTON User Manual page 62 3.6.11. Dashboard: Wireless Client When using a Wireless Client configuration, the Wireless Space Dashboard includes a page named Wireless Client (Fig. 96). This page is divided by two tabs: Available Networks (Fig. 97). The Wireless Space lists the Wi- ✦ Fi networks in your area and offers a summary of each. The green network represents the Wi-Fi that the Wireless Space has joined.

  • Page 63: Internet Port: Nas+Switch

    Point). Signs of a potential communication problem include: ✦ LaCie Network Assistant lists the Wireless Space but the web browser responds only with errors when typing the name or IP address in the URL field. ✦ LaCie Network Assistant does not list the Wireless Space even though it is properly connected via Ethernet or Wi-Fi. ✦ The front light is solid green or blue and the Ethernet lights in the back are both green or green and yellow, yet the web browser and/or LaCie Network Assistant cannot reach the Wireless Space. ✦ The browser continues to respond with errors when attempting to load the Dashboard with the device name or its last known IP address. Fig. 100 To troubleshoot the Wireless Space using the Recovery function: 1. Disconnect the Wireless Space from all LAN Ethernet ports. 2. Turn off or disconnect from any wireless service on the com- puter.
  • Page 64 LaCie Wireless Space INTERNET Port: Switch/Recovery • DESIGN BY NEIL POULTON User Manual page 64 6. Open LaCie Network Assistant>Configuration Window to see the addressing information. To access the Wireless Space Dash- board, do one of the following (Fig. 102): ✦ Click the Web configuration page link in LaCie Network As- sistant ✦ Enter the Recovery IP address in the browser URL window 172.20.0.1 ✦ Enter the name of your Wireless Space in the browser URL Enter the login and password created during setup (Fig. 103) to reach the Dashboard welcome page (Fig.

  • Page 65: Basic Endnote

    LaCie Wireless Space Basic Endnote • DESIGN BY NEIL POULTON User Manual page 65 3.8. Basic Endnote This is the end of the Basic section. Please refer to the User Man- ual for tips on Troubleshooting (6. Troubleshooting), operation, or changes in the configuration. If you have become an expert in using the Wireless Space and the needs of your network have changed, consider one of the Beyond Basic modes in the next section. Fig. 105...

  • Page 66: Beyond Basic Install

    4.2. Configuration 3: Wireless Access Point (Switch) 4.3. Configuration 4: Router - Wired Only 4.4. Configuration 5: Router Wireless Access Point 3.4. LaCie Network Assistant 4.5. Administering Your LaCie Wireless Space - Beyond Basic It is important to determine which configuration works best for your network. Please review 2. What is the best configuration for my net- work? to find the preferred mode for your Wireless Space. With a...

  • Page 67: Before The Installation

    LaCie Wireless Space Beyond Basic Introduction • DESIGN BY NEIL POULTON User Manual page 67 4.1. Before the Installation IP address do you want to assign the Wireless Space? Similar to most routers, the default router address for the Wireless Space is 192.168.1.1. However it may be changed on the The Wireless Space Setup Wizard is easy to follow as it guides you Network LAN page in the Dashboard (4.5.4.

  • Page 68: Configuration 3: Wireless Access Point (Switch)

    Please see 2. What is the best configuration for my network? before preparing your Wireless Space. 4.2.1. Wireless Space Setup Wizard Preparing for the setup: ✦ Do not connect the Wireless Space to your router, switch, or Internet provider via Ethernet. ✦ Quit the applications running on your computer, especially those having to do with Internet connectivity (web browsers, email, etc.) ✦...
  • Page 69 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 69 Select Enable Wi-Fi. Click Continue. (Fig. 107) Select NAS Extender Wi-Fi. Click Continue. (Fig. 108) 6. You will be prompted to connect your computer to the Wireless Space. Please use one of the three ports marked LAN1, LAN2, or LAN3 on the back of the Wireless Space (1.4.2. Rear View). DO NOT connect the cable to the port named INTERNET (Fig. 109). LaCie recommends a Gigabit Ethernet cable for optimal performance (1.6. Gigabit Ethernet Cables And Connectors). 7. Once the Wireless Space has been connected to the computer, click Continue. 8. The Setup will search for your Wireless Space. Move to the next step if the device is found. If not, please reinsert the Ethernet...
  • Page 70 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 70 9. You must provide the following information to create a Wi-Fi access point (Fig. 110): Network name ✦ Security protocol (Fig. 111) ✦ Password ✦ Speed (Fig. 112) ✦...
  • Page 71 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 71 10. Click Continue when all the fields are filled in (example, Fig. 113). 11. You must select and confirm a password that contains at least eight alphanumeric characters (Fig. 114). While not mandatory, LaCie recommends that you change the Login and Device name as well. Make certain to note your entries for future reference. Click Commit when you are have filled in all the fields. IMPORTANT INFO: Frequent errors during the Setup may occur if too much time is taken to click Continue or Commit. If you experi- ence such errors, please consider your responses before starting the Setup Wizard.

  • Page 72: Configuration 4: Router - Wired Only

    IP addresses using DHCP. Most DHCP serv- Fig. 115 ers or devices use the same default settings as the Wireless Space when it is set to a Router configuration, which can create IP address conflicts on a network. Please see 2. What is the best configuration for my network? before preparing your Wireless Space. 4.3.1. Wireless Space Setup Wizard Preparing for the setup: ✦ Do not connect the Wireless Space to your router, switch, or Internet provider before running the Setup Wizard. ✦ Quit the applications running on your computer. ✦ Locate your router, switch, or Internet provider. If you are cur- rently using a hub, please consider if it is necessary since the Wireless Space provides the same function with its additional Ethernet ports.
  • Page 73 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 73 Select Router. Click Continue. (Fig. 116) 6. You will be prompted to connect your computer to the Wireless Space. Please use one of the three ports marked LAN1, LAN2, or LAN3 on the back of the Wireless Space (1.4.2. Rear View). DO NOT connect the cable to the port named INTERNET (Fig. 117). LaCie recommends a Gigabit Ethernet cable for optimal performance (1.6. Gigabit Ethernet Cables And Connectors). 7. Once the Wireless Space has been connected to the computer, click Continue. 8. The Setup will search for your Wireless Space. Move to the next step if the device is found. If not, please reinsert the Ethernet Fig. 116...
  • Page 74 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 74 13. The default router IP address for the Wireless Space is now 192.168.1.1. If your router or Internet provider is prepared to add the Wireless Space to the network, move to step 14. If you are unsure or must change the IP address: ✦ You may maintain the Ethernet connection between your com- puter and the Wireless Space. However, do not connect the Wireless Space to the server, router, or Internet provider be- fore considering DHCP server conflicts. ✦ DHCP Server Conflicts: Your network most likely receives IP addresses via a router, server, or Internet provider. The de-...

  • Page 75: Configuration 5: Router Wireless Access Point

    Please see 2. What is the best configuration for my network? before preparing your Wireless Space. 4.4.1. Wireless Space Setup Wizard Preparing for the setup: ✦ Do not connect the Wireless Space to your router, switch, or Internet provider via Ethernet. ✦ Quit the applications running on your computer, especially those having to do with Internet connectivity (web browsers, email, etc.) ✦...
  • Page 76 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 76 Select Enable Wi-Fi. Click Continue. (Fig. 121) Select Wifi Router. Click Continue. (Fig. 122) 6. You will be prompted to connect your computer to the Wireless Space. Please use one of the three ports marked LAN1, LAN2, or LAN3 on the back of the Wireless Space (1.4.2. Rear View). DO NOT connect the cable to the port named INTERNET (Fig. 123). LaCie recommends a Gigabit Ethernet cable for optimal performance (1.6. Gigabit Ethernet Cables And Connectors). 7. Once the Wireless Space has been connected to the computer, click Continue. 8. The Setup will search for your Wireless Space. Move to the next Fig. 121...
  • Page 77 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 77 9. You must provide the following information to create a Wi-Fi access point (Fig. 124): Network name ✦ Security protocol (Fig. 125) ✦ Password ✦ Speed (Fig. 126) ✦...
  • Page 78 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 78 10. Click Continue when all the fields are filled in (example, Fig. 127). 11. You must select and confirm a password that contains at least eight alphanumeric characters (Fig. 128). While not mandatory, LaCie recommends that you change the Login and Device name as well. Make certain to note your entries for future reference. 12. Click Commit when you are ready for the Wireless Space Setup to configure the device. IMPORTANT INFO: Frequent errors during the Setup may occur if too much time is taken to click Continue or Commit. If you experi- ence such errors, please consider your responses before starting the Setup Wizard.
  • Page 79 LaCie Wireless Space Beyond Basic Install: Setup Wizard • DESIGN BY NEIL POULTON User Manual page 79 14. The default router IP address for the Wireless Space is now 192.168.1.1. If your router or Internet provider is prepared to add the Wireless Space to the network, move on to step 15. If you are unsure or must change the IP address: ✦ You may maintain the Ethernet connection between your com- puter and the Wireless Space. However, do not connect the Wireless Space to the server, router, or Internet provider be- fore considering DHCP sever conflicts. ✦ DHCP Server Conflicts: Your network most likely receives IP addresses via a router, server, or Internet provider. The de-...

  • Page 80: Administering Your Lacie Wireless Space - Beyond Basic

    Wireless Space - Beyond Basic The Dashboard is a browser-based tool for administering your Wire- less Space. To update the settings or browse files, type the Wire- less Space’s IP address or machine name in your browser address bar (3.4.2. Connect to the LaCie Wireless Space Dashboard directly from the browser). LaCie Network Assistant also offers an easy link to launch the Dashboard (3.4.1. Connect to the LaCie Wireless Space Dashboard using LaCie Network Assistant).

  • Page 81: Dashboard: Wireless Ap

    LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 81 4.5.1. Dashboard: Wireless AP The widget for Wireless AP will appear with Beyond Basic configura- tions NAS Ethernet - Wireless Access Point and NAS Router - Wire- less Access Point. Additionally, the light will remain blue during stan- dard operation (see 1.8. Light Behavior). The Dashboard welcome page for NAS Ethernet - Wireless Access Point is pictured in Fig. 131: a. Click on the name of the page to view all of the Wi-Fi access point settings b. The widget displays the basic Wi-Fi access point settings c. The Mode widget indicates the current configuration The Wireless AP page has four tabs that provide detailed informa- Fig. 131...

  • Page 82: Wireless Ap - Security

    LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 82 TECHNICAL INFO: It is normal for the Dashboard to close when making changes to the settings. Please be patient when attempting to reconnect as the Wireless Space updates the settings. With certain adjustments, such as turning Wi-Fi off or on, the Wireless Space IP address may change as well. If the Dashboard does not load in your browser, open LaCie Network Assistant to see if the IP address has changed. You may have to refresh LaCie Network Assistant by quit- ting and restarting the program. 4.5.1.2. Wireless AP - Security This tab reveals the security settings created in the Setup for Wi-Fi access point configurations. If a new access point is being created, Fig. 134 the fields on the page will be blank (Fig.
  • Page 83 LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 83 WEP-128 has been selected in Fig. 136. You have the option to en- ter a WEP key manually or to allow the LaCie Wireless Space Dash- board to generate a key for you. Click the lock once (Fig. 136) for a new WEP password (Fig. 137). You may also generate additional keys. With the WEP Key(s) selected, click APPLY. WPA is displayed in Fig. 138. Note that all the WEP key fields are greyed out. Enter the password in the WPA PSK field before clicking APPLY. continued on the next page>> Fig. 136 Fig. 137 Fig. 138...

  • Page 84: Wireless Ap - Mac Address Filter

    LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 84 4.5.1.3. Wireless AP - MAC address filter Add further security to the Wireless Space Wi-Fi by limiting who may join the network by MAC address. Check the box for MAC address filter enabled (Fig. 139) to activate a green addition symbol. Click on the green plus sign to add each new MAC address that will have access to the Wireless Space Wi-Fi. The default for MAC address filtering is off. If it is enabled, only those systems who have their MAC addresses registered in this tab will have the right to use the Wireless Space Wi-Fi.

  • Page 85: Dashboard: Router

    LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 85 4.5.2. Dashboard: Router Pages A router configuration signifies the creation of a new network, or sub-network. The Wireless Space will assign IP addresses to all con- nected devices, wired and/or wireless. Router configurations have three important Dashboard pages: Network WAN, Network LAN, and Firewall.

  • Page 86: Dashboard: Network Wan

    LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 86 4.5.3. Dashboard: Network WAN Network WAN lists how the Wireless Space reaches the wide area network (WAN) or Internet. The information is similar to the Network LAN page in the Basic administration section (3.6.6. Dashboard: Network LAN) with some additional options. The importance of this page cannot be overstated since the proper settings prevent IP ad- dressing conflicts with the router, server or Internet provider. In a router configuration, the Ethernet cable is attached to the IN- TERNET port (see 4.6. INTERNET Port: NAS+Router) on the back of the Wireless Space. This is the connection from the Wireless Space...
  • Page 87 LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 87 Dynamic DNS You can manage your Wireless Space while away from the network by enabling Dynamic DNS (Fig. 147, c). Please note that you must also create a Dynamic DNS account with a third-party provider on its web site. There are many companies that offer free remote access service using Dynamic DNS (see the pulldown menu after enabling the feature, Fig. 148). Once you have selected a company and created an account on its web site, enter the pertinent information in the fields: Full Hostname , Account, and Password ✦ When all the fields are completed, click APPLY. There are two additional settings that may also be required for Dy- namic DNS to work: UPnP IGD and NAT-PMP. Both settings are available on the Firewall page (4.5.5.

  • Page 88: Dashboard: Network Lan

    LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 88 4.5.4. Dashboard: Network LAN Use this page to manage the Wireless Space network. LAN Interface The default router address for the Wireless Space is 192.168.1.1 (Fig. 150, a and 1.9.

  • Page 89: Avoiding Router Ip Address Conflicts: Example

    Once all the important fields have been completed, I click APPLY (Fig. 153, c). The Dashboard will lose connection while the Wireless Space executes the changes. After a few moments, I type the new router IP address in the URL win- dow of my web browser to launch the Dashboard (Fig. 155). After Fig. 154 confirming that all the settings have been changed, I know that the Wireless Space will no longer have router addressing conflicts with the router, server, or Internet provider. Please note that there are many addressing possibilities to use for the fields on the Network LAN page. LaCie cautions users to pay close attention to addressing conflicts, both on the WAN and the Wireless Space network. Fig. 155...

  • Page 90: Dashboard: Firewall

    LaCie Wireless Space Administering the LaCie Wireless Space: Beyond Basic • DESIGN BY NEIL POULTON User Manual page 90 4.5.5. Dashboard: Firewall DMZ, port forwarding, and NAT-PMP are among the advanced fea- tures offered by the Wireless Space on the Firewall page. We have provided a lengthy glossary Glossary) at the back of this User Manual to learn more. This page is divided into three tabs: Basic Settings, Static Port For- warding, and Dynamic Port Forwarding. For those with a keen un- derstanding of port forwarding, the interface on the Static Port For- warding tab is standard and easy to use.

  • Page 91: Internet Port: Nas+Router

    LaCie Wireless Space INTERNET Port: Router/WAN • DESIGN BY NEIL POULTON User Manual page 91 4.6. INTERNET Port: NAS+Router For switch configurations, the INTERNET port is a convenient Recov- ery port with a static IP address (3.7. INTERNET Port: NAS+Switch). However, the INTERNET port becomes the door to the network WAN or Internet when using the Wireless Space as a router. Further infor- mation on connecting the Wireless Space to the network is available in the following sections: 4.1. Before the Installation ✦ 4.3. Configuration 4: Router - Wired Only ✦...

  • Page 92: Beyond Basic Endnote

    LaCie Wireless Space Beyond Basic Endnote • DESIGN BY NEIL POULTON User Manual page 92 4.7. Beyond Basic Endnote This is the end of the Beyond Basic installation and administration section. Please refer to the User Manual for tips on Troubleshoot- ing (6. Troubleshooting), operation, or changes in the configuration. Please do not forget to check for firmware updates for your Wireless Space at www.lacie.com. LaCie hopes that you enjoy your Wireless Space! Fig. 159...

  • Page 93: Glossary

    LaCie Wireless Space Glossary • DESIGN BY NEIL POULTON User Manual page 93 5. Glossary DLNA™ (Digital Living Network Alliance) - A standard (based on UPnP) widely embraced by consumer electronic manufacturers to allow entertainment devices within the home to share movies, music, and photos across a home network. Many networking and wireless terms may appear new or a bit chal- lenging to follow. This small glossary of networking acronyms and DMZ (Demilitarized...
  • Page 94 LaCie Wireless Space Glossary • DESIGN BY NEIL POULTON User Manual page 94 Dynamic Port Forwarding - Allows applications to use SOCKS serv- Inotify - Inotify is used to automatically update directory views, re- ers on local ports for network communication and Internet access. load configuration files, log changes, backup, synchronize, and up- This can be very convenient as it will avoid having to configure port load. For example, it can initiate an update of a UPnP database. forwarding each time an application is used. The SOCKS is config- Internal Port - This port deals with requests inside the LAN, such as ured on a server to route traffic while the application, such as a web accessing files or sending emails. browser, is assigned a SOCKS in its preferences. Internet Provider - Broadband Internet service is available with a External Port - This port deals with requests outside the LAN, work- cable modem provided by the local cable provider. The cable mo- ing with the NAT (network address translation) to convert external dem is linked to the computer via an Ethernet cable.
  • Page 95 LaCie Wireless Space Glossary • DESIGN BY NEIL POULTON User Manual page 95 iTunes™ Server - iTunes libraries can be shared over a local net- Netmask - Also known as the subnetwork. A subnet address is part of work via a computer, network disk, or network device that acts as the IP address information, generally placing a network geography the iTunes Server. The protocol is used to detect libraries on the onto one or more computers. That is, everyone with a certain subnet...
  • Page 96 LaCie Wireless Space Glossary • DESIGN BY NEIL POULTON User Manual page 96 PPPoE (Point-to-Point Protocol over Ethernet) - A network protocol etc.) that are valid responses are allowed through the firewall. An that connects more than one computer on a LAN to a shared ac- administrator may also set firewall traffic parameters using SPI, mak- cess point. The access point may be a DSL (digital subscriber line), a ing certain that unwanted packets are not allowed into the network cable modem, or a wireless connection to the Internet. PPPoE uses from the WAN. point-to-point protocol (PPP - common for standard dial-up phone SSH Server (Secure Shell) - A secure network protocol to exchange service) together with the Ethernet protocol, thereby allowing mul- data between two devices on the same LAN. The communication tiple users to have access within a LAN. occurs with a shell, such as Command Prompt (Windows) or Ter-...
  • Page 97 LaCie Wireless Space Glossary • DESIGN BY NEIL POULTON User Manual page 97 TKIP (Temporal Key Integrity Protocol) - An enhanced version of wireless access point start with the base WEP Key, then add one WEP security, TKIP was created to strengthen hardware that was of the four WEP Key IDs to extend the characters and strengthen only compatible with WEP. It adds additional security encryption to...

  • Page 98: Troubleshooting

    LaCie Wireless Space Troubleshooting • DESIGN BY NEIL POULTON User Manual page 98 6. Troubleshooting In the event that your LaCie Wireless Space is not working correctly, please take a look at the following Troubleshooting sections and at the FAQs published on our web site – www.lacie.com. One of these FAQs may provide an answer to your specific question. You can also visit the downloads page, where the most recent software updates will be available: www.lacie.com/support/downloads We urge you to try troubleshooting any problem with the Wireless Space to the best of your ability. Please note that the device has a hardware reset feature in the event that troubleshooting does not resolve the issue. The hardware reset is a last resort. See 1.5. Pow- er Button Functions for more information on resetting the Wireless Space.

  • Page 99: Troubleshooting The Usb Connection(S) And Share Files

    Wireless Space via Go>Connect to Server>WirelessSpace (or, the name you have assigned to the device)? Are the volumes listed in LaCie Network Try to access the USB volumes in LaCie Network Assistant (3.5.2. Assistant? Accessing Shares Using LaCie Network Assistant) The USB volumes are visible Why does my 4 TB hard drive appear The Wireless Space does not support volumes larger than 2 TB. but the capacity is wrong. as only 2 TB on the Dashboard Drives You may partition the drive to create smaller volumes for use page? with the Wireless Space. Please consider if you are receiving...

  • Page 100: Windows Users

    LaCie Wireless Space Troubleshooting • DESIGN BY NEIL POULTON User Manual page 100 Problem Question Solution Files cannot be copied to a Why can’t I copy files to the USB volume Please check the file format of your volume. This is a common USB volume connected to the using the Dashboard File Browser, the problem with volumes formatted in Mac HFS+ Journaled. Try to Wireless Space. Dashboard Drive page, or the desktop? reformat the drive if the problem persists - make certain to copy all data before formatting any hard drive. There are two drive icons for Why can’t I see my Time Machine back-...
  • Page 101 Similar to OpenShare, USB drives connected to the Wireless Space are available to everyone on the network. See 3.5. Accessing and Transferring Files for more information. Are the volumes listed in LaCie Network Try to access the USB volumes in LaCie Network Assistant (3.5.2. Assistant? Accessing Shares Using LaCie Network Assistant) The USB volumes are visible Why does my 4 TB hard drive appear The Wireless Space does not support volumes larger than 2 TB. but the capacity is wrong. as only 2 TB on the Dashboard Drives...

  • Page 102: Troubleshooting The Network Connection

    LaCie Wireless Space Troubleshooting • DESIGN BY NEIL POULTON User Manual page 102 6.4. Troubleshooting the Network Connection Problem Question Solution The system is not recognized Does your computer’s configuration Check section 1.2. Minimum Computer and Network Require- by the computer. meet the minimum system require- ments for more information. ments? The system is not recognized Is the system’s power supply con-...
  • Page 103 LaCie Wireless Space Troubleshooting • DESIGN BY NEIL POULTON User Manual page 103 Problem Question Solution The Wireless Space does not Why can’t I see the Wireless Space in Quit LaCie Network Assistant and restart the program. appear in LaCie Network LaCie Network Assistant? Assistant. The Wireless Space appears Have your quit and restarted LaCie Net- If LaCie Network Assistant sees the Wireless Space but the Dash- in LaCie Network Assistant work Assistant to confirm that the Wire- board cannot connect, you may a problem with network settings. but I cannot connect to the less Space is available? If you configured your network using static IP, make certain that Dashboard. the IP addresses for the Wireless Space are in the same range (i.e. between 192.168.1.1 and 192.168.1.250)
  • Page 104 Problem Question Solution The Wireless Space does not Are you using a Switch configuration? Make certain that the Wireless Space is connected to the router, appear on the network. switch, or Internet provider via one of its three LAN ports. Check LaCie Network Assistant for the Wireless Space. If it is listed, try to launch the Dashboard using the hyperlink. Confirm that your computer is also using DHCP for its IP set- tings. If the connections are correct and the problem persists, try to ac- cess the Dashboard in Recovery mode (see 3.7. INTERNET Port: NAS+Switch) to troubleshoot IP addressing. Are you using a Router configuration? For most Router configurations, the Wireless Space is connected to the router, switch, or Internet provider via its INTERNET port.

  • Page 105: Light Indications

    LaCie Wireless Space Troubleshooting • DESIGN BY NEIL POULTON User Manual page 105 Problem Question Solution Port Forwarding no longer Why did Port Forwarding stop working? Check the Dashboard Firewall page to confirm that the Port For- works (Router configuration warding rule is still valid. If not, you can reenter the information. only). If you have added a new rule, make certain that it does not conflict with previous Port Forwarding rules.

  • Page 106: Contacting Customer Support

    LaCie Wireless Space Contacting Customer Support • DESIGN BY NEIL POULTON User Manual page 106 7. Contacting Customer Support Before You Contact Technical Support Read the manuals and review section 6. Troubleshooting. 2. Try to isolate the problem. If possible, make the drive the only external device on the CPU, and make sure that all of the cables are correctly and firmly attached. If you have asked yourself all of the pertinent questions in the trou- bleshooting checklist, and you still can’t get your LaCie drive to work properly, contact us at www.lacie.com. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand: Information Location 1. LaCie hard drive serial Located on a sticker next to number one of the product feet. 2. Macintosh/PC model...

  • Page 107: Lacie Technical Support Contacts

    LaCie Wireless Space Contacting Customer Support • DESIGN BY NEIL POULTON User Manual page 107 7.1. LaCie Technical Support Contacts LaCie Asia LaCie Australia http://www.lacie.com/cn/contact/ http://www.lacie.com/au/contact/ LaCie Belgium LaCie Brazil http://www.lacie.com/be/contact/ (Dutch) http://www.lacie.com/us/contact http://www.lacie.com/befr/contact/ (French) LaCie Canada LaCie Denmark http://www.lacie.com/ca/contact/ (English) http://www.lacie.com/dk/contact http://www.lacie.com/cafr/contact/ (French) LaCie Finland LaCie France http://www.lacie.com/fi/contact/ http://www.lacie.com/fr/contact/ LaCie Germany LaCie Ireland http://www.lacie.com/de/contact/...

  • Page 108: Warranty Information

    108 8. Warranty Information This Limited Warranty applies only to hardware products manufac- To obtain warranty service, call LaCie Technical Support. You will tured by or for LaCie that can be identified by the “LaCie” trademark, be asked to provide your LaCie product’s serial number, and you trade name, or logo affixed to them. The Limited Warranty does not may be asked to furnish proof of purchase to confirm that the drive apply to any non-LaCie hardware products or any software, even if is still under warranty. packaged or sold with LaCie hardware. Manufacturers, suppliers, All drives returned to LaCie must be securely packaged in their origi- or publishers, other than LaCie, may provide their own warranties nal box and shipped with postage prepaid. to the end user purchaser, but LaCie, in so far as permitted by law, provides their products “as is”. Software distributed by LaCie with or without the LaCie brand name (including, but not limited to system IMPORTANT INFO: Register online for free technical support: www. software) is not covered under this Limited Warranty. Refer to the lacie.com/register...

Table of Contents