Leg Rest - Permobil PS Junior User Manual

PS Junior User Manual
Setting the leg support
Length
1. Remove the screw securing the
length setting for the leg support
(see picture).
2. Adjust the leg support to the
required position and secure the
setting by refitting the screw.
Increased length setting
If required, the length of the leg sup-
port can be further shortened in four
final stages of 25 mm each (total 100
mm).
1. Remove the foot plate, which is
attached by two screws (see pic-
ture).
2. Remove the foot plate bracket
(B), which is attached by a screw,
washer and nut (see picture).
3. Remove the lower tube of the leg
support, which is attached by a
screw (A) (see picture).
The screw securing the length setting
for the leg support
The foot plate is attached by two
B
The foot plate bracket is
attached by a screw
30
Settings & Adjustments
screws
A