Table of Contents
Advertisement
PS Seat User Manual
Design and function
Design and function
The symbols on the control panel show which seat functions are available, which
are limited, and which will cause a reduction in speed or stop the wheelchair
altogether.
The symbols may be unlit, permanently lit up or flashing.
Unlit symbol
The symbol for a function is unlit. This means that the function is not currently
available. Use the "shift" button to switch between the left and right seat function
on the control system.
Lit symbol
A steadily lit symbol provides speed-related information.
A steady green light means the wheelchair can travel at maximum speed.
A steady yellow light means that the wheelchair's maximum speed is limited
because of the current position of the seat function.
A steady red light means that the wheelchair cannot be driven because of the
current position of the seat function.
Flashing symbol
A flashing symbol provides information relating to the actuator.
A flashing green symbol represents a special function, the memory function, for
example.
A flashing yellow symbol indicates that the function is blocked in one direction
due to a safety switch. The control system for the function in question only works
in the "safe" direction.
A flashing red symbol indicates that a fault has been detected in the actuator
concerned, and in consequence that seat function may not work. Contact ser-
vice.
19
Advertisement
Table of Contents
