Bluetooth - Mobile Phone - Kenwood DPX-5300BT Instruction Manual

Bluetooth®
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to
[ON]. (Page 18)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
• [KEY 1] zone and [KEY 2] zone illuminate in green color and flash.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 16)
During a call:
• [LCD DISPLAY] zone illuminates according to the settings made for [COLOR
SELECT] (page 25) while [KEY 1] zone and [KEY 2] zone illuminate in green
color.
• If you turn off the unit, Bluetooth is disconnected.
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
knob or one of the
number buttons (1 to 6).
Reject a call
Press
End a call
Press
While talking on the first incoming call...
Answer another Press
incoming call and
hold the current call
Reject another
Press
incoming call
While having two active calls...
End current call and
Press
activate held call
Swap between the Press
current call and held
call
Adjust the phone Turn the volume knob
volume*1 during a call.
[00] to [35] (Default: [15])
Press 6 IW during
Switch between hands-
free and private talk
a call.
modes*3
*1, *2, *3: See page 16.
On the remote control
or the volume Press .
Press .
.
Press .
.
. Press .
Press .
.
Press .
.
. Press .
Press VOL *2 or
VOL during a call.
( Not available )
ENGLISH
15