Rev 2.0 Mar.11
•
Most commands with parameters can be entered with ? to read the current
value (for example, AT&D? will respond with "2" if the default has not been
changed).
•
Optional parameters are denoted with square brackets [ ].
•
AT Commands are not case sensitive. A capital "E" is the same as a lower-
case "e".
•
When you are using a terminal connection, if you enter a command which is
recognized by the AirLink GX400, it will respond with "OK". If the command is
not recognized, the response will be "ERROR".
•
Those commands applicable only to certain model numbers of the AirLink
GX400 will be noted.
Caution:
Symbols listed with commands, such as *, /, &, or ?, are part of the command
and must be included. Commands with symbols other than * may require PassThru mode.
Configuring the AirLink GX400
37