Sierra Wireless AirLink GX400 User Manual page 34

AirLink GX400
34
Figure 4-1: Connect To
b. Change or verify the settings:
· Bits per Second: 115200 (default)
· Data Bits: 8
· Parity: None
· Stop Bits: 1
· Flow Control: Hardware (or None).
Figure 4-2: Port Settings
Tip: If you have configured the AirLink GX400 for settings different than the defaults for
Bits per Second, Data Bits, Parity, and/or Stop Bits, you will need to use your changed
settings.
c. Select OK.
Using Ethernet:
d. Select TCP/IP (Winsock) for "Connect Using".
e. Type in 192.168.13.31 for Host Address.
f. Change the "Port Number" to 2332.
2140712