Pole Mount Kit Component Description - Motorola MSAT-G2 Installation Manual

2pcs. Clamp, Part No. SPAC-M00428
2pcs. Clamp, Part No. SPAC-M00429
8pcs. Nuts M8, Part No. SPAC-M90-10105
2pcs. Flange, Part No. SPAC-M00430
1pcs. Plug for Mounting Pole, Part No. SPAC-M00233
1pcs. Screw M5*10, Part No. SPAC-M90-10104
These components are shipped in one separate box. The installer, upon receipt of a
box, is required to check the contents.
Figure 20 – SPAC-AS-MSV320 Maritime Antenna W/ Optional Pole Mount

Pole Mount Kit Component Description

Mounting Pole Part No. SPAC-M00424 is a piece of standard tubing with a mounting flange
welded onto it. The component is made from a stainless steel alloy that is easy to cut, machine
and weld. It is part of the ventilating system for the dome. The standard length is 400mm
and must not be shortened in maritime applications. Shorter versions for non-maritime
applications may be supplied on special request.
Rubber Gasket, Part No. SPAC-M00425 is used to ensure that water or dust does not enter
into the area around the centre hole in the bottom of the dome. The centre hole is part of
the ventilating system for the dome and MUST NOT BE BLOCKED. The gasket will also
protect the TNC-type connector from water and dust.
MSAT-G2 Installation Guide 19