Spacecom Spac-As-Msv220 Land-Mobile / Fixed-Site Antenna; Magnetic (Temporary) Mounting Option - Motorola MSAT-G2 Installation Manual

Do not locate the antenna close to interfering signal sources or receivers. It is recommended
that no other antennas be located within three (3) meters of the MSAT-G2 antenna. If there
is other equipment installed near the MSAT-G2 satellite radio it is recommended to operate
all equipment simultaneously and verify there is no co-interference.

SpaceCom SPAC-AS-MSV220 Land-Mobile / Fixed-site Antenna

Magnetic (Temporary) Mounting option

For temporary use – or where drilling of holes is to be avoided – a Magnetic Mount
Installation Kit is offered. SpaceCom part no: SPAC-AC-1016.
Three (3) magnetic mounts each with an adhesive force of at least 420 N (Newton)
are required to secure the MSV220 antenna.
Figure 16 – SPAC-AS-MSV220 2-axis Antenna W/ Magnetic Mounts
MSAT-G2 Installation Guide 15