Setting Up A Usb Driver For Windows Me - Motorola SB5100 Series Installation Manual

3-14 Installation and Operation

Setting Up a USB Driver for Windows Me

To set up a USB driver for Windows Me:
1
Be sure the SURFboard Cable Modem CD-ROM is inserted into the CD-ROM drive before
you plug in the USB cable.
This CD contains the USB drivers and must be inserted and read by the PC before you
connect the cable modem to the PC.
2
Be sure disc load activity is complete before plugging in the USB cable.
System files are needed when loading the USB drivers. These files may already be on the
PC or you may be required to load them from the Microsoft CD that came with the
subscriber's PC.
The PC automatically recognizes the USB connection and after several seconds, the
following window is displayed:
Although your SURFboard cable modem model number may be different than in the images in
this manual, the procedure is the same.
Click Next. Windows Me automatically searches for the correct USB drivers and installs
14
them.
SURFboard Cable Modem Installation Manual