Dhcp / Tftp - Motorola SB5100 Series Installation Manual

B-10 Event Log Messages
Code Event Log Messages
B555.0 First DRIVER_TEK_INVALID Msg
B555.1 Just received another TEK_INVALID Msg
B556.0
BLP – Authorization Wait Timeout out of
range
B556.1
BLP – Reauthorization Wait Timeout out
of range
B556.2 BLP – Operational Wait Timeout out of
range
B556.3 BLP – Rekey Wait Timeout out of range
B556.4 BLP – TEK Grace Timeout out of range
B556.5 BLP – Authorization Reject Wait Timeout
out of range
B556.6 BLP – Authorization Grace Timeout out of
range

DHCP / TFTP

Code Event Log Messages
D500.0 Error in initializing DHCP Client
D501.0 TFTP - Unable to allocate spaces for
Modem Capabilities data.
D501.1 TFTP, Unable to allocate space for
software upgrade filename, CONTINUE
D501.2 TFTP, Unable to allocate spaces for Class
of Service, CONTINUE
D501.3 TFTP, Unable to allocate spaces for
SNMP Access Ctrl Obj, CONTINUE
D501.4 TFTP, Unable to allocate space for SNMP
Access Ctrl, CONTINUE
D501.5
TFTP, Unable to allocate spaces for
SNMP MIB Obj, CONTINUE
D501.6
TFTP, Unable to allocate spaces for
whole buffer
D501.7
TFTP, Unable to allocate spaces for
Vendor Spec Data, CONTINUE
D501.8 TFTP, Unable to allocate spaces for
vendor spec
SURFboard Cable Modem Installation Manual
Level Cable Modem Actions
7 (Info) Information purpose to indicate that
CM just receives a first TEK Invalid
Message from the driver due to CRC
failed.
7 (Info) Information purpose to indicate that
CM received another TEK Invalid
message from the driver due to CRC
failed
4 (Error) Log it
4 (Error) Log it
4 (Error) Log it
4 (Error) Log it
4 (Error) Log it
4 (Error) Log it
4 (Error) Log it
Level Cable Modem Actions
4 (Error)
4 (Error) Set value to 0. Possibly reset the
board
4 (Error) Set to NULL.
4 (Error) Set to NULL.
4 (Error) Set to NULL.
4 (Error) Set to NULL.
4 (Error) Set to NULL.
4 (Error) Set to NULL. The board will reset
4 (Error) Set to NULL
4 (Error) Set to NULL