Motorola SB5100 Series Installation Manual page 97

Code Event Log Messages
X501.24 Unit Update – error reading header from
[filename]
X501.25 Unit Update – error reading image file
header.
X501.27 Unit Update – can't update from <image
name> to <image name>
X501.28 Unit Update – Not updating. This image
is not for this platform.
X501.29 No need to update to <name of image> -
same image
X501.30 Can't allocate memory to write SNMP Uu
Parameters to Flash.
X501.31 Unable to save SNMP Uu Parameters to
Flash.
X501.32
Unit Update. Can't perform Unit Update,
Unit Update already in progress.
X501.33
SNMP Unit Update was in progress
before reboot. Retrying Update.
X501.34 Unit Updated Failed. Reached Max
Download Retries.
Event Log Messages
Level Cable Modem Actions
4 (Error) Continue using current image. Update
failed. CM was unable to transfer the
new image from the server or the
image is corrupt. Check for network
problems, that file exists, that
docsDevSwServer is the correct
address of the Software Server and
retry the operation. Obtain a new copy
of the image file.
4 (Error) Continue using current image. Update
failed. CM was unable to transfer the
new image from the server or the
image is corrupt. Check for network
problems, that file exists, that
docsDevSwServer is the correct
address of the Software Server and
retry the operation. Obtain a new copy
of the image file.
4 (Error) Continue using current image file.
Illegal update. Can't go from installed
image to requested image. Either
image is for wrong product, or an
illegal downgrade was attempted.
4 (Error) Continue using current image file.
Illegal update. Can't go from installed
image to requested image. Image is
wrong image for this product.
7 (Info) No action taken. Attempted to update
to image that is already loaded on CM.
4(Error) See previous messages to determine
if Update completed. Value of
docsDevSwOperStatus may be
incorrect after reboot. If problem
persists contact your vendor.
4(Error) See previous messages to determine
if Update completed. Value of
docsDevSwOperStatus may be
incorrect after reboot. If problem
persists contact your vendor.
4(Error) SNMP attempted to start a Unit
Update while another Unit Update was
already in progress.
4(Error) SNMP was attempting a Unit Update
when the CM rebooted for some
reason. CM will reattempt the Unit
Update.
4(Error) Unit Update failed. The image
requested was corrupt.
SURFboard Cable Modem Installation Manual
B-25