Setting Up A Usb Driver In Windows Me - Motorola SBV5120 User Manual

Introduction

Setting Up a USB Driver in Windows Me

Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted into the CD-ROM drive before you plug in the
USB cable.
1
Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see
Startup for a Single User"
Hardware Wizard window is displayed:
2
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed. Otherwise, be sure the SURFboard VoIP Cable Modem
CD-ROM is correctly inserted in your CD-ROM drive.
3
Click Finish to complete the installation.
When you finish setting up the USB driver, you can continue with
or Windows Me" on page 20.
Home Print
Installation
Although your SURFboard VoIP cable modem model number
may be different than in the images in this guide, the
procedure is the same.
on page 7. A few seconds after you complete the USB connection, the Add New
X
14
Exit
Troubleshooting Glossary
"Configuring TCP/IP in Windows 95, 98,
SBV5120 Series VoIP Cable Modem User Guide
License
"Cabling and