Html User Interface; Figure 4-1 Configuration Manager Help Window - Motorola SB5100 Series Installation Manual

Section 4

HTML User Interface

This section provides instructions for using the SURFboard cable modem HTML user interface.
The windows — Help, Startup, Signal, Addresses, Configuration, and Logs — provide
configuration and troubleshooting information, such as MAC and IP addresses and frequency
and Event logs.
The IP address for this user interface is 192.168.100.1. To use the HTML user interface:
1
Connect a cable from the laptop or PC Ethernet port to the cable modem Ethernet port on
the SURFboard cable modem rear panel.
2
Turn on the PC and verify that the SURFboard cable modem is plugged in.
3
Open the browser.
Type http://192.168.100.1/mainhelp.html. A Configuration Manager Help window is
4
displayed as illustrated in Figure 4-1:
Figure 4-1
Configuration Manager Help window
This window provides an overview of the other windows and a standard troubleshooting
checklist. From this window you can select any of the other windows by clicking on the
buttons on the bottom toolbar.
SURFboard Cable Modem Installation Manual