Motorola SB5100 Series Installation Manual page 34

3-20 Installation and Operation
Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose the
10
one for the Ethernet card or USB port connected to the cable modem.
Click Properties. The TCP/IP Properties window is displayed:
11
Click the IP Address tab.
12
Click Obtain an IP address automatically.
13
Click OK to accept the TCP/IP settings.
14
Click OK to close the Network window.
15
Click OK when prompted to restart the computer and then click OK again.
16
When you complete TCP/IP configuration, go to "Verifying an IP Address in Windows 95,
Windows 98, and Windows Me" on page 3-27.
SURFboard Cable Modem Installation Manual