Setting Up A Usb Driver In Windows Me - Motorola SBG900 User Manual

Overview Installation Troubleshooting Contact

Setting Up a USB Driver in Windows Me

1
Insert the Motorola SURFboard Wireless Cable Modem Gateway CD-ROM in the CD-ROM drive. This CD
contains the USB drivers and must be inserted and read by the PC before you connect the SBG900 to the
PC.
2
Connect the USB cable as shown in
A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:
3
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.
4
If the window above is displayed, click Finish. Otherwise, be sure the Motorola SURFboard Wireless Cable
Modem Gateway CD-ROM is correctly inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with
Home Print
Configuration: Basic Gateway TCP/IP Wireless USB
USB Connection.
X
86
Exit
FAQ Specifications Glossary License
"Configuring TCP/IP".
SBG900 User Guide