Incorrect Date And Time; Optical Drive Not Cannot Read Discs; Added Drive Reported As Defective - Fujitsu PRIMERGY TX100 S3 Core Edition Operating Manual

Troubleshooting and tips
8.2

Incorrect date and time

Ê Set the date and time in the operating system.
If the date and time are still wrong after the server has been switched off and
back on again, replace the lithium battery (for a description refer to the
"PRIMERGY TX100 S3 Upgrade and Maintenance Manual") or contact the
Fujitsu Technology Solutions customer service team.
8.3

Optical drive not cannot read discs

Ê Ensure that the CD/DVD/BD is properly inserted into the optical drive with its
label facing up.
Ê Check the CD/DVD/BD for dust or smudges. If necessary, carefully wipe
down the disc with a soft, lint-free cloth.
Ê Check if the CD/DVD/BD is scratched, bent or otherwise damaged to the
point of unreadability. In this case, replace the damaged disc.
8.4

Added drive reported as defective

The RAID controller is not configured for this drive.
Ê Use ServerView RAID Manager to reconfigure your RAID controller.
For further information, please refer to the "ServerView Suite RAID
Management" user guide available on your ServerView Suite DVD 2 or from
the Fujitsu Technology Solutions manuals server at
http://manuals.ts.fujitsu.com. Point to Industry Standard Servers - Software -
ServerView Suite - Administration and Manageability - RAID Management.
For the Japanese market please use the following URL:
http://primeserver.fujitsu.com/primergy/manual/
I
Replace the hard disk drive if it continues to be reported as defective
(see the "PRIMERGY TX100 S3 Core Edition Server" Upgrade and
Maintenance Manual).
82 Operating Manual
TX100 S3 Core Edition