Installing The Top Cover - Toshiba Satellite A100 Maintenance Manual

4 Replacement Procedures

Installing the Top Cover

Install the top cover with the display assembly according to the following procedures and
Figures 4-21, 4-22.
1. Seat the top cover, adjusting its position.
2. Secure the following 11 latches on the top cover, in that order:
- Three bottom latches
- Three Left latches
- Four right latches
- One front latch
3. Connect the switch board, touch pad, touch pad board flat cables and speaker L and R
cable to CN14, CN15, CN12, CN5 and CN8 on the system board.
4. Turn the computer upside down and secure it with the following 17 screws:
- Fifteen M2.5x6 black bind screws
- Two M2.5x4 black flat-head screws
4-38
Satellite A100/A105 / TECRA A7
4.8 Top Cover
Maintenance Manual