4.19 Touch Pad and Button Board
Removing the Touch Pad and Button Board (for Commercial Model)
Remove the touch pad and button board according to the following procedures and Figure 4-
42.
1. Disconnect the touch pad flat cables from JP1 on the touch pad.
2. Remove five M2.5x4 black flat-head screws securing the touch pad.
3. Remove the touch pad.
Figure 4-42 Removing the touch pad and button board
4. Remove two M2.5x3 flat-round-head screws securing the button board.
5. Remove the button board.
6. Disconnect the button board flat cable from CN2000 on the button board.
Satellite A100/A105 / TECRA A7
Maintenance Manual
4 Replacement Procedures
4-67