Cpu Cooling Module And Fan; Removing The Cpu Cooling Module And Fan (For Vga Card Model) - Toshiba Satellite A100 Maintenance Manual

4.9 CPU Cooling Module and Fan

4.9 CPU Cooling Module and Fan
CAUTION: When removing the cooling module, keep the following in mind:
The cooling module can become very hot during operation. Be sure to let it cool down
before starting the repair work.
Do not touch or cause shock to the fan in the cooling module.
NOTE: The screws for Steps 5 cannot be removed, only loosened.

Removing the CPU Cooling Module and Fan (for VGA card Model)

Remove the CPU cooling module and fan according to the following procedures and Figures
4-23, 4-24.
1. Disconnect the fan cable from CN13.
2. Remove the two M2.5x6 black bind screws securing the fan.
3. Remove two M2x4 white flat-head screws on the CPU cooling module using the
indicated numbered order.
4. Remove the CPU bracket.
5. Release the four screws on the VGA cooling module using the indicated numbered
order.
6. Remove the CPU cooling module and fan.
Satellite A100/A105 / TECRA A7
Maintenance Manual
4 Replacement Procedures
4-39