Batch Parameters Configuration - Toshiba Satellite A100 Maintenance Manual

3 Diagnostic Programs
Configure batch parameters and all the test item's parameters.
•
Load Batch Parameters
Upload all the test items and the parameters to the *.ini file.
•
Save Batch Parameters
Save all the parameters and the test items that are configured in the editor to a
specified file.
•
Log Parameters
Configure LOG parameters.
•
Specify LOG Viewer
Specify the viewer for the LOG file.
•
Display Error Log File
Load the LOG file viewer specified in the Specify Log Viewer to view the LOG
file.
•
DOS Shell
Enter the DOS Shell and execute the DOS programs. You can also exit to the
Service Diagnostics Editor by the command of EXIT.
•
Exit to DOS
Exit the Service Diagnostics Editor and back to DOS.

3.3.2 Batch Parameters Configuration

The batch parameters configuration screen can be accessed through Service
Diagnostics/OPTIONS -> EDIT BATCH PARAMETERS -> BATCH
PARAMETERS:
24 Satellite A100/A105 / TECRA A7 Maintenance Manual
3.3 Option