Installing The Display Assembly - Toshiba Satellite A100 Maintenance Manual

4.7 Display Assembly

Installing the Display Assembly

Install the display assembly according to the following procedures and Figures 4-19, 4-20.
1. Place the display panel in the correct position and push the wireless antenna cable
into the top cover.
2. Connect the LCD/FL cable to CN3 on the system board.
3. Secure the display assembly with four M2.5x5 black flat-head screws.
4. Close the display panel and turn the computer so the back is facing you and secure it
with two M2.5x5 black flat-head screws.
Satellite A100/A105 / TECRA A7
Figure 4-20 Removing the display assembly
Maintenance Manual
4 Replacement Procedures
4-35