Table of Contents
Advertisement
Service Parameters:
Ack Parameters:
Nak Parameter:
Notes:
Clear Connection Service
This service releases the specified connection, call (C1-D3), and its connectionID from the
specified call (C1). The result is the same as if the user pressed the extension's on/off button
during a hands-free conversation. The Clear Connection Service cannot be used if the exten-
sion is physically off-hook.
Function: cstaClearConnection(), CSTAClearConnectionConfEvent
Direction: C → S
Private Parameters: userInfo
Functional Description:
6
call
noData
universalFailure
•
NO_ACTIVE_CALL (24)
The callID of the connectionID specified in the request is invalid.∙
•
RESOURCE_OUT_OF_SERVICE (34)
The DBS is off-line.∙
•
OUTSTANDING_REQUEST_LIMIT_EXCEEDED (44)
The application has too many outstanding CSTA requests.
•
INVALID_OBJECT_STATE (22)
1. One of the connections in the call has a call on hold.
2. One on the connections in the call is being alerted by another monitored extension.
•
Switch operation - After a successful Clear Call Service request:
•
Every station dropped will be in the on-hook idle state.
•
Any lamps associated with the call are off.
•
Displays are cleared.
The Clear Connection Service disconnects the specified device from the designated call.
Issued April 2000
Section 470 - TSAPI Programmer's Guide
[mandatory] a valid connection identifier indicates the call to
be cleared. The deviceID of call is optional. If it is specified, it
is ignored.
None for this service.
DBS-92-470
Advertisement
Table of Contents
