Table of Contents
Advertisement
Section 470 - TSAPI Programmer's Guide
Functional Description:
Service Parameters:
DBS-92-470
The Transferred Call Event Report indicates that an existing call was transferred to
another device and the device requesting the transfer has been dropped from the call. The
transferringDevice will not appear in any future events for the call.
The Transferred Event Report is generated for the following circumstances:
•
When a DBS extension completes a transfer by pressing the "transfer" button on the
phone.
•
When a DBS extension places a call on hold, initiates a new call and then hangs up.
(On-Hook Transfer when enabled.)
•
When an application successfully completes a cstaTransferCall request.
monitorCrossRefID
primaryOldCall
secondaryOldCall
transferringDevice
transferredDevice
transferredConnections [optional - supported] specifies a count of the number of
localConnectionInfo
cause
Issued April 2000
[mandatory] contains the handle to the monitor request for
which this event is reported.
[mandatory] specifies the callID of the call that was
transferred. This is usually the held call before the transfer.
This call ended as a result of the transfer.
[mandatory] specifies the callID of the call that was
transferred. This is usually the active call before the transfer.
This call is ended as a result of the transfer.
[mandatory] specifies the device which is controlling the
transfer. This is the device which did the transfer.
[mandatory] specifies the new transferred-to device.
• If the device is an on-PBX station, the extension is speci-
fied.
• If the party is an off DBS device, then the trunk number is
given.
devices and a list of two connectionIDs and two deviceIDs
which resulted from the transfer.
• If a device is a DBS , the extension is specified.
• The static deviceID of a queued endpoints is set to the split
extension of the queue.
• If a party is a trunk, then the caller id information or trunk
identifier is given..
[optional - partially supported] specifies the connection state of
the monitored device for this call.
[optional - not supported] specifies the reason for this event.
35
Advertisement
Table of Contents
