Service Initiated Event; Transferred Event - Panasonic Selection 470 Programmer's Manual

Service Parameters:

Service Initiated Event

Function: CSTAServiceInitiatedEvent
Direction: C ← S
Functional Description:
• When a DBS extension begins to receive intercom dial tone.
• When a station is forced off-hook because a cstaMakeCall is requested on that station.
• When a DBS extension receives intercom dial tone after placing a call on hold.
• After transferring a call via the "prog" button on the phone.
• After parking a trunk call.
• Initiating a call via a FF-key or a softkey on the phone.
Service Parameters:

Transferred Event

Function: CSTATransferredEvent
Direction: C ← S
34
monitorCrossRefID
retrievedConnection
retrievingDevice
localConnectionInfo
cause
The Service Initiated Event Report indicates that telecommunication service is initiated.
This event is generated as follows:
monitorCrossRefID
initiatedConnection
localConnectionInfo
cause
Issued April 2000
Section 470 - TSAPI Programmer's Guide
[mandatory] contains the handle to the monitor request for
which this event is reported.
[mandatory] specifies the connection for which the call has
been taken off the hold state.
[mandatory] specifies the device which connected the call from
the hold state. This is the extension that has been connected the
call.
[optional - supported] specifies the connection state of the
monitored device for this call.
[optional - not supported] specifies the reason for this event.
[mandatory] contains the handle to the monitor request for
which this event is reported.
[mandatory] specifies the connection for which the service
(dial tone) has been initiated.
[optional supported] specifies the connection state of the
monitored device for this call.
[optional - not supported] specifies the reason for this event.
DBS-92-470