Network Reached Event; Retrieved Event - Panasonic Selection 470 Programmer's Manual

Section 470 - TSAPI Programmer's Guide

Network Reached Event

Function: CSTANetworkReachedEvent
Direction: C ← S
Functional Description:
Service Parameters:

Retrieved Event

Function: CSTARetrievedEvent
Direction: C ← S
Functional Description:
DBS-92-470
This event indicates that a call has reached an outgoing trunk.
This event report implies that there will be no additional device feedback, except discon-
nect/drop, provided for this party in the call. A Network Reached Event Report is never
sent for calls made to devices connected directly to the DBS.
monitorCrossRefID
connection
trunkUsed
calledDevice
localConnectionInfo
cause
The Retrieved Event Report indicates that the DBS detects a previously held call has been
retrieved.
It is generated when a DBS extension connects to a call that has been previously placed on
hold. Retrieving a held call can be done either manually at the station or via a cstaRe-
trieveCall Service request from a client application.
Issued April 2000
[mandatory] contains the handle to the monitor request for
which this event is reported.
[mandatory] specifies the endpoint for the outbound
connection to another network.
[mandatory] specifies the trunk identifier that was used to
establish the connection.
[mandatory - not supported] specifies the destination device of
the call. The deviceID is not supported
(ID_NOT_REQUIRED).
[optional - supported] specifies the connection state of the
monitored device for this call.
[optional - supported] specifies the reason for this event.
33