Run Setup - Lenovo 7387 Hardware Maintenance Manual

70
Lenovo 3000 J Series
Diagnostic Error Code
071-00X-XXX
071-01X-XXX
071-02X-XXX
Audio port error
071-03X-XXX
Audio port failure
071-04X-XXX
Audio port failure
071-195-XXX
Audio port Test aborted by user
071-196-XXX
Audio port test halt, error threshold
exceeded
071-197-XXX
Audio port test warning
071-198-XXX
Audio port test aborted
071-199-XXX
Audio port test failed, cause unknown
071-25X-XXX
Audio port failure
080-000-XXX
Game Port interface Test Passed
080-XXX-XXX
Game Port interface Error
080-195-XXX
Game Port interface Test aborted by user
FRU/Action
1. Run Setup
2. Flash the system. See "Flash update
procedures" on page 205
3. System board
1. Speakers
2. Microphone
3. Audio card, if installed
4. System board

1. Run Setup

2. Audio card, if installed
3. System board
Information only
Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, "Using the Setup Utility," on
page 51
2. Re-run test
3. Replace the component that is called out
in warning statement
4. Replace the component under test
1. If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, "Using the Setup Utility," on
page 51
2. Flash the system and re-test. See "Flash
update procedures" on page 205
3. Go to "Undetermined problems" on page
81
1. See "Undetermined problems" on page
81
2. Flash the system and re-test. See "Flash
update procedures" on page 205
3. Replace component under function test
1. Speakers
2. Audio card, if installed
3. System board
No action
1. Remove the game port device and
re-test the system
Information only
Re-start the test, if necessary