Administrator Or Supervisor Password - Lenovo 7387 Hardware Maintenance Manual

3000 j series
Hide thumbs Also See for 7387:
Table of Contents

Advertisement

1. Start the Setup Utility program (see "Starting the Setup Utility program" on
2. From the Setup Utility program menu, select Set User Password and press
3. The password dialog box will be displayed. Type the new password, and press
4. When prompted to confirm the password, type the password again. If you type
To delete a previously set user password, do the following:
Note: When prompted for a password, you can type either your user or
1. From the Setup Utility program menu, select Set User Password and press
2. Press any key to continue.

Administrator or Supervisor Password

Setting an Administrator or Supervisor Password deters unauthorized persons
from changing configuration settings.
After an Administrator or Supervisor Password is set, a password prompt is
displayed each time you try to access the Setup Utility program. If the wrong
password is typed, an error message is displayed. If the wrong password is typed
three times, you must turn the computer off and start again.
If both the user and administrator/supervisor passwords are set, either password
can be typed. However, to change any configuration settings, you must use the
administrator/supervisor password.
Setting, changing, and deleting an administrator/supervisor
password
To set, change, or delete an administrator/supervisor password, do the following:
Note: A password can be any combination of up to eight characters (A- Z, a-z, and
1. Start the Setup Utility program (see "Starting the Setup Utility program" on
2. From the Setup Utility program menu, select Set Administrator Password or
3. The password dialog box will be displayed. Type the new password, and press
4. When prompted to confirm the password, type the password again. If you type
To delete a previously set administrator/supervisor password, do the following:
Note: When prompted for a password, you must type your administrator/
1. From the Setup Utility program menu, select Set Administrator Password
2. Press any key to continue.
52
Lenovo 3000 J Series
page 51).
Enter.
Enter.
the password in correctly, the password will be installed.
administrator/supervisor password.
Enter. A message will display that indicates the password has been disabled.
0-9).
page 51).
Set Supervisor Password and press Enter.
Enter.
the password correctly, the password will be installed.
supervisor password.
orSet Supervisor Password and press Enter. A message will display that
indicates the password has been disabled.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents