Replacing the diskette drive
1. Remove the cover. See "Removing the cover" on page 114.
2. Remove the drive bay assembly. See "Removing and replacing the drive bay
3. Remove the screws at the bottom of the diskette drive that secure the drive to
4. Slide the diskette drive out of the drive bay assembly.
5. Slide the new drive into the bay until the screws holes at the bottom of the
6. Reinstall the drive bay assembly. See "Removing and replacing the drive bay
7. Go to "Completing the FRU replacement" on page 144.
142
Lenovo 3000 J Series
assembly" on page 118.
the drive bay assembly.
drive are aligned and install the screws that secure the drive to the drive bay
assembly.
assembly" on page 118.